[Sat Sep 24 17:23:51 2011] Detection parameters:
  Position = (314.5, 471.5) = 14 51 56.17 58 11 57.0
  Extent = 0.7" x 0.5", rotation angle = 16 degrees
  Source counts = 39.4 +/- 6.4
  Background counts = 1.6
  Rate = 0.0008 +/- 0.0001

[Sat Sep 24 17:23:54 2011] Off-axis axis estimate = 3.85'
[Sat Sep 24 17:25:10 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:25:10 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Sat Sep 24 17:25:10 2011] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.424
[Sat Sep 24 17:25:10 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.78"
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5.ximg exists
[Sat Sep 24 17:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Sep 24 17:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5.csv
[Sat Sep 24 17:25:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Sep 24 17:25:11 2011] Fit fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Sep 24 17:25:28 2011] Spatial fit model total counts = 45.647100, observed total counts = 45.000000
[Sat Sep 24 17:25:28 2011] Offset between fit and detection position for source 3 = 0.646367 pixels
[Sat Sep 24 17:25:28 2011] 46.281150 total counts/ 9.481350 bgd. counts: snr = 11.951168
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.646367 pixels
  Position = (315.0, 471.9) = 14 51 56.17 58 11 57.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 36.8 +/- 6.8
  Background counts = 9.5
  Rate = 0.0007 +/- 0.0001
[Sat Sep 24 17:25:28 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 17:25:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 17:25:28 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 17:25:28 2011] Source does appear to be extended
[Sat Sep 24 17:25:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:26:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:26:01 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sat Sep 24 17:26:01 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.088
[Sat Sep 24 17:26:01 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.70"
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5.ximg exists
[Sat Sep 24 17:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Sep 24 17:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5.csv
[Sat Sep 24 17:26:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Sep 24 17:26:02 2011] Fit fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Sep 24 17:26:22 2011] Spatial fit model total counts = 46.493200, observed total counts = 45.000000
[Sat Sep 24 17:26:22 2011] Offset between fit and detection position for source 3 = 0.077589 pixels
[Sat Sep 24 17:26:22 2011] 46.421840 total counts/ 8.157340 bgd. counts: snr = 13.397438
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.077589 pixels
  Position = (315.0, 472.0) = 14 51 56.16 58 11 57.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 38.3 +/- 6.8
  Background counts = 8.2
  Rate = 0.0008 +/- 0.0001
[Sat Sep 24 17:26:22 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 17:26:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 17:26:22 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 17:26:22 2011] Source does appear to be extended
[Sat Sep 24 17:26:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:29:41 2011] Not overwriting source region fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.reg
[Sat Sep 24 17:29:41 2011] Extracting stamp from image fullrun_ccd3_acisf07022_pi14-548_cl_sm2.00.img.gz, (283, 440) - (347, 504)
[Sat Sep 24 17:29:41 2011] Writing fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3.gif
[Sat Sep 24 17:29:56 2011] ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.evt and ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Sep 24 17:29:56 2011] Size of ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.evt.gz[events] = 41 counts
[Sat Sep 24 17:29:56 2011] Mean chipx,y = (487.59, 978.93)
[Sat Sep 24 17:29:56 2011] Mean tdetx,y = (4153.07, 3548.59)
[Sat Sep 24 17:29:56 2011] chipx,y range = (467.00-505.00, 961.00-998.00)
[Sat Sep 24 17:29:56 2011] Size of ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 14 counts
[Sat Sep 24 17:29:56 2011] ../../acisf07022/products/images/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.img and ../../acisf07022/products/images/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Sep 24 17:29:56 2011] ../../acisf07022/products/spectra/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.pi and ../../acisf07022/products/spectra/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Sep 24 17:29:56 2011] Not generating rmf since there are only 38 counts
[Sat Sep 24 17:29:59 2011] ../../acisf07022/products/lightcurves/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.lc and ../../acisf07022/products/lightcurves/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Sep 24 17:31:07 2011] 186.112
[Sat Sep 24 17:31:24 2011] Updating aperture counts using extracted products
[Sat Sep 24 17:31:24 2011] Error reading totcts from fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Sep 24 17:31:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 17:31:24 2011] Using photon index=1.80, rate=0.000774, arf fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src3.arf
[Sat Sep 24 17:31:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 17:31:24 2011] Updating source flux to 9.6e-15
[Sat Sep 24 17:31:43 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting