[Tue Feb 14 05:33:07 2012] Detection parameters:
  Position = (781.0, 317.7) = 14 52 58.72 58 4 46.9
  Extent = 1.0" x 0.6", rotation angle = 107 degrees
  Source counts = 12.4 +/- 3.9
  Background counts = 2.6
  Rate = 0.0003 +/- 8e-05

[Tue Feb 14 05:33:08 2012] Off-axis axis estimate = 2.52'
[Tue Feb 14 06:58:55 2012] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 06:58:55 2012] Initial guess for spatial extent in simple fitting = 0.50"
[Tue Feb 14 06:58:55 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990
[Tue Feb 14 06:58:55 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.50"
[Tue Feb 14 07:23:17 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass0_src19.ximg exists
[Tue Feb 14 07:23:17 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass0_src19_1.ximg exists
[Tue Feb 14 07:23:17 2012] Fit fullrun_ccd3_acisf07021_pi14-548_cl_pass0_src19 appears to have run properly
[Tue Feb 14 07:23:18 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Tue Feb 14 07:23:18 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Feb 14 07:23:18 2012] Fit fullrun_ccd3_acisf07021_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Feb 14 08:07:50 2012] Spatial fit model total counts = 16.353500, observed total counts = 17.000000
[Tue Feb 14 08:07:50 2012] Offset between fit and detection position for source 30 = 1.059289 pixels
[Tue Feb 14 08:07:50 2012] 15.750320 total counts/ 1.978820 bgd. counts: snr = 9.789897
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.059289 pixels
  Position = (781.5, 318.6) = 14 52 58.72 58 4 47.1
  Extent = 0.9 (0.7-1.5)", rotation angle = 0
  Source counts = 13.8 +/- 4.0
  Background counts = 2.0
  Rate = 0.0003 +/- 8e-05
[Tue Feb 14 08:07:50 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 08:07:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 08:07:50 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 08:07:50 2012] Source does appear to be extended
[Tue Feb 14 08:07:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 09:18:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 09:18:16 2012] Initial guess for spatial extent in simple fitting = 0.94"
[Tue Feb 14 09:18:16 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.083
[Tue Feb 14 09:18:16 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.94"
[Tue Feb 14 09:43:03 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18.ximg exists
[Tue Feb 14 09:43:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18.csv
[Tue Feb 14 09:43:03 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18_1.ximg exists
[Tue Feb 14 09:43:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18.csv
[Tue Feb 14 09:43:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07021_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 09:43:03 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Tue Feb 14 09:43:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18.csv
[Tue Feb 14 09:43:03 2012] fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Feb 14 09:43:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18.csv
[Tue Feb 14 09:43:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07021_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 10:22:59 2012] Spatial fit model total counts = 14.776000, observed total counts = 16.000000
[Tue Feb 14 10:22:59 2012] Offset between fit and detection position for source 30 = 0.137791 pixels
[Tue Feb 14 10:22:59 2012] 14.039100 total counts/ 0.000000 bgd. counts: snr = 2234471900954313.500000
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.137791 pixels
  Position = (781.4, 318.7) = 14 52 58.72 58 4 47.2
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Tue Feb 14 10:22:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 10:22:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 10:22:59 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 10:22:59 2012] Source does appear to be extended
[Tue Feb 14 10:22:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 10:37:58 2012] Writing source region out to fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_src.reg
[Tue Feb 14 10:37:58 2012] Extracting stamp from image fullrun_ccd3_acisf07021_pi14-548_cl_sm2.00.img.gz, (738, 275) - (825, 362)
[Tue Feb 14 10:37:58 2012] Writing fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30.gif
[Tue Feb 14 10:40:47 2012] Size of ../../acisf07021/products/events/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_src.evt.gz[events] = 16 counts
[Tue Feb 14 10:40:47 2012] Mean chipx,y = (743.00, 794.38)
[Tue Feb 14 10:40:47 2012] Mean tdetx,y = (4337.62, 3804.00)
[Tue Feb 14 10:40:47 2012] chipx,y range = (727.00-759.00, 775.00-806.00)
[Tue Feb 14 10:40:47 2012] Size of ../../acisf07021/products/events/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 63 counts
[Tue Feb 14 10:40:48 2012] Not generating rmf since there are only 14 counts
[Tue Feb 14 10:40:48 2012] arf not found, will run specextract
[Tue Feb 14 10:40:50 2012] ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_bkg.pi not found
[Tue Feb 14 10:40:50 2012] ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30.warf not found
[Tue Feb 14 10:40:50 2012] ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30.wrmf not found
[Tue Feb 14 10:40:50 2012] Removal of ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30.soff failed
[Tue Feb 14 10:40:50 2012] Failed to rename ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_grp.pi to ../../acisf07021/products/spectra/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_src.pi
[Tue Feb 14 10:40:57 2012] No arf file found
[Tue Feb 14 10:42:20 2012] Updating aperture counts using extracted products
[Tue Feb 14 10:42:20 2012] Error reading totcts from fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_src.pi
[Tue Feb 14 10:42:20 2012] No arf file for this source, not re-computing flux
[Tue Feb 14 10:42:27 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 14 10:42:28 2012] acisf07021/analysis//spectral/fullrun_ccd3_acisf07021_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete