[Wed Sep 21 05:57:06 2011] Detection parameters:
  Position = (905.9, 1140.2) = 0 33 49.26 -43 23 7.2
  Extent = 0.5" x 0.5", rotation angle = 4 degrees
  Source counts = 21.1 +/- 4.7
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Wed Sep 21 05:57:07 2011] Off-axis axis estimate = 1.81'
[Wed Sep 21 05:58:21 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 05:58:21 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Sep 21 05:58:21 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.836
[Wed Sep 21 05:58:21 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.41"
[Wed Sep 21 05:58:23 2011] fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2.ximg exists
[Wed Sep 21 05:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2.csv
[Wed Sep 21 05:58:23 2011] fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Sep 21 05:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2.csv
[Wed Sep 21 05:58:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07017_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 05:58:23 2011] fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Sep 21 05:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2.csv
[Wed Sep 21 05:58:23 2011] fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Sep 21 05:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2.csv
[Wed Sep 21 05:58:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07017_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 05:58:38 2011] Spatial fit model total counts = 21.101000, observed total counts = 25.000000
[Wed Sep 21 05:58:38 2011] Offset between fit and detection position for source 5 = 5.382192 pixels
[Wed Sep 21 05:58:38 2011] 23.301949 total counts/ 23.301900 bgd. counts: snr = 0.000010
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.382192 pixels
  Position = (909.4, 1144.4) = 0 33 49.13 -43 23 5.4
  Extent = 1.5" x 1.5", rotation angle = 0
  Source counts = 0.0 +/- 4.8
  Background counts = 23.3
  Rate = 1e-09 +/- 0.0001
  Deleting source due to low Poisson probability