[Wed Oct 26 17:06:59 2011] Detection parameters:
  Position = (1338.5, 924.6) = 3 17 40.58 -44 24 3.3
  Extent = 0.5" x 0.5", rotation angle = 139 degrees
  Source counts = 14.1 +/- 3.9
  Background counts = 0.9
  Rate = 0.0005 +/- 0.0001

[Wed Oct 26 17:07:00 2011] Off-axis axis estimate = 0.53'
[Wed Oct 26 17:07:53 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:07:53 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Oct 26 17:07:53 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.341
[Wed Oct 26 17:07:53 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.39"
[Wed Oct 26 17:07:54 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15.ximg exists
[Wed Oct 26 17:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15.csv
[Wed Oct 26 17:07:54 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15_1.ximg exists
[Wed Oct 26 17:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15.csv
[Wed Oct 26 17:07:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:07:55 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed Oct 26 17:07:55 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Oct 26 17:07:55 2011] Fit fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Oct 26 17:08:04 2011] Spatial fit model total counts = 15.752200, observed total counts = 16.000000
[Wed Oct 26 17:08:04 2011] Offset between fit and detection position for source 15 = 0.668040 pixels
[Wed Oct 26 17:08:04 2011] 15.567350 total counts/ 1.432450 bgd. counts: snr = 11.810084
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.668040 pixels
  Position = (1338.7, 925.2) = 3 17 40.59 -44 24 3.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.1 +/- 3.9
  Background counts = 1.4
  Rate = 0.0005 +/- 0.0001
[Wed Oct 26 17:08:04 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:08:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:08:04 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:08:04 2011] Source does appear to be extended
[Wed Oct 26 17:08:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:08:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:08:25 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Wed Oct 26 17:08:25 2011] source mask rpix=0.7, npix_max = 6, mask sum = 4, frac = 0.654
[Wed Oct 26 17:08:25 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.36"
[Wed Oct 26 17:08:26 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15.ximg exists
[Wed Oct 26 17:08:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 17:08:26 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Oct 26 17:08:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15.csv
[Wed Oct 26 17:08:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:08:27 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Oct 26 17:08:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 26 17:08:27 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Oct 26 17:08:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 26 17:08:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:08:36 2011] Spatial fit model total counts = 14.064000, observed total counts = 16.000000
[Wed Oct 26 17:08:36 2011] Offset between fit and detection position for source 15 = 0.100921 pixels
[Wed Oct 26 17:08:36 2011] 13.617581 total counts/ 0.338781 bgd. counts: snr = 22.813888
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.100921 pixels
  Position = (1338.8, 925.2) = 3 17 40.59 -44 24 3.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.3 +/- 3.7
  Background counts = 0.3
  Rate = 0.0004 +/- 0.0001
[Wed Oct 26 17:08:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:08:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:08:36 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:08:36 2011] Source does appear to be extended
[Wed Oct 26 17:08:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:11:17 2011] Not overwriting source region fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.reg
[Wed Oct 26 17:11:17 2011] Extracting stamp from image fullrun_ccd3_acisf06972_pi14-548_cl_sm2.00.img.gz, (1322, 909) - (1355, 942)
[Wed Oct 26 17:11:17 2011] Writing fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15.gif
[Wed Oct 26 17:11:58 2011] ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.evt and ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Wed Oct 26 17:11:58 2011] Size of ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.evt.gz[events] = 14 counts
[Wed Oct 26 17:11:58 2011] Mean chipx,y = (1011.14, 989.21)
[Wed Oct 26 17:11:58 2011] Mean tdetx,y = (4142.79, 4072.14)
[Wed Oct 26 17:11:58 2011] chipx,y range = (1002.00-1023.00, 975.00-1006.00)
[Wed Oct 26 17:11:58 2011] Size of ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 1 counts
[Wed Oct 26 17:11:58 2011] ../../acisf06972/products/images/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.img and ../../acisf06972/products/images/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Wed Oct 26 17:11:58 2011] Not generating rmf since there are only 13 counts
[Wed Oct 26 17:11:58 2011] arf not found, will run specextract
[Wed Oct 26 17:12:00 2011] ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_bkg.pi not found
[Wed Oct 26 17:12:00 2011] ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15.warf not found
[Wed Oct 26 17:12:00 2011] ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15.wrmf not found
[Wed Oct 26 17:12:00 2011] Removal of ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15.soff failed
[Wed Oct 26 17:12:00 2011] Failed to rename ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_grp.pi to ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.pi
[Wed Oct 26 17:12:05 2011] ../../acisf06972/products/lightcurves/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.lc and ../../acisf06972/products/lightcurves/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Wed Oct 26 17:12:49 2011] No arf file found
[Wed Oct 26 17:12:53 2011] Updating aperture counts using extracted products
[Wed Oct 26 17:12:53 2011] Error reading totcts from fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_src.pi
[Wed Oct 26 17:12:54 2011] No arf file for this source, not re-computing flux
[Wed Oct 26 17:13:00 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 17:13:01 2011] acisf06972/analysis//spectral/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete