[Wed Oct 26 17:06:59 2011] Detection parameters:
  Position = (1079.7, 551.6) = 3 17 52.47 -44 27 6.8
  Extent = 0.7" x 0.5", rotation angle = 140 degrees
  Source counts = 16.0 +/- 4.1
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Wed Oct 26 17:07:00 2011] Off-axis axis estimate = 3.26'
[Wed Oct 26 17:07:53 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:07:53 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Oct 26 17:07:53 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.933
[Wed Oct 26 17:07:53 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.64"
[Wed Oct 26 17:07:54 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14.ximg exists
[Wed Oct 26 17:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14.csv
[Wed Oct 26 17:07:54 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14_1.ximg exists
[Wed Oct 26 17:07:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14.csv
[Wed Oct 26 17:07:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06972_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:07:55 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Wed Oct 26 17:07:55 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Oct 26 17:07:55 2011] Fit fullrun_ccd3_acisf06972_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Oct 26 17:08:04 2011] Spatial fit model total counts = 16.843900, observed total counts = 19.000000
[Wed Oct 26 17:08:04 2011] Offset between fit and detection position for source 10 = 0.825862 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.825862 pixels
  Position = (1080.5, 551.8) = 3 17 52.46 -44 27 6.9
  Extent = 1.1 (0.9-1.5)" x 0.4 (0.3-0.6)", rotation angle = 218 (202-230) degrees
  Source counts = 17.3 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Oct 26 17:08:04 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:08:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:08:04 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:08:04 2011] Source does appear to be extended
[Wed Oct 26 17:08:04 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.47
[Wed Oct 26 17:08:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 17:08:25 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Wed Oct 26 17:08:25 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.155
[Wed Oct 26 17:08:25 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.78"
[Wed Oct 26 17:08:26 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14.ximg exists
[Wed Oct 26 17:08:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14.csv
[Wed Oct 26 17:08:26 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14_1.ximg exists
[Wed Oct 26 17:08:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14.csv
[Wed Oct 26 17:08:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06972_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 17:08:27 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Wed Oct 26 17:08:27 2011] fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Oct 26 17:08:27 2011] Fit fullrun_ccd3_acisf06972_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Wed Oct 26 17:08:36 2011] Spatial fit model total counts = 20.424400, observed total counts = 20.000000
[Wed Oct 26 17:08:36 2011] Offset between fit and detection position for source 10 = 0.132082 pixels
[Wed Oct 26 17:08:36 2011] 20.699950 total counts/ 5.131150 bgd. counts: snr = 6.873023
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.132082 pixels
  Position = (1080.5, 552.0) = 3 17 52.46 -44 27 6.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 15.6 +/- 4.5
  Background counts = 5.1
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 17:08:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 17:08:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 17:08:36 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 17:08:36 2011] Source does appear to be extended
[Wed Oct 26 17:08:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 17:11:17 2011] Not overwriting source region fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 26 17:11:17 2011] Extracting stamp from image fullrun_ccd3_acisf06972_pi14-548_cl_sm2.00.img.gz, (1055, 526) - (1106, 578)
[Wed Oct 26 17:11:17 2011] Writing fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10.gif
[Wed Oct 26 17:11:55 2011] ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.evt and ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 26 17:11:55 2011] Size of ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.evt.gz[events] = 16 counts
[Wed Oct 26 17:11:55 2011] Mean chipx,y = (571.25, 921.25)
[Wed Oct 26 17:11:55 2011] Mean tdetx,y = (4210.75, 3632.25)
[Wed Oct 26 17:11:55 2011] chipx,y range = (554.00-587.00, 909.00-939.00)
[Wed Oct 26 17:11:55 2011] Size of ../../acisf06972/products/events/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 9 counts
[Wed Oct 26 17:11:55 2011] ../../acisf06972/products/images/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.img and ../../acisf06972/products/images/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 26 17:11:55 2011] ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.pi and ../../acisf06972/products/spectra/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 26 17:11:55 2011] Not generating rmf since there are only 15 counts
[Wed Oct 26 17:11:58 2011] ../../acisf06972/products/lightcurves/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.lc and ../../acisf06972/products/lightcurves/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 26 17:12:49 2011] 191.802
[Wed Oct 26 17:12:53 2011] Updating aperture counts using extracted products
[Wed Oct 26 17:12:53 2011] Error reading totcts from fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 26 17:12:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 17:12:54 2011] Using photon index=1.80, rate=0.000523, arf fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10.arf
[Wed Oct 26 17:12:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 17:12:54 2011] Updating source flux to 6.3e-15
[Wed Oct 26 17:13:00 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 17:13:01 2011] acisf06972/analysis//spectral/fullrun_ccd3_acisf06972_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete