[Mon Sep 26 16:37:38 2011] Detection parameters:
  Position = (333.1, 785.2) = 21 10 32.42 21 31 21.2
  Extent = 0.6" x 0.5", rotation angle = 48 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0003 +/- 8e-05

[Mon Sep 26 16:37:39 2011] Off-axis axis estimate = 3.83'
[Mon Sep 26 16:38:47 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:38:47 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Mon Sep 26 16:38:47 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Mon Sep 26 16:38:47 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.78"
[Mon Sep 26 16:38:48 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6.ximg exists
[Mon Sep 26 16:38:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 16:38:48 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Sep 26 16:38:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6.csv
[Mon Sep 26 16:38:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06971_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:38:48 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Sep 26 16:38:48 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Sep 26 16:38:48 2011] Fit fullrun_ccd6_acisf06971_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Sep 26 16:39:02 2011] Spatial fit model total counts = 18.944200, observed total counts = 19.000000
[Mon Sep 26 16:39:02 2011] Offset between fit and detection position for source 6 = 0.739103 pixels
[Mon Sep 26 16:39:02 2011] 19.147230 total counts/ 6.690430 bgd. counts: snr = 4.815922
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.739103 pixels
  Position = (333.6, 785.8) = 21 10 32.42 21 31 21.3
  Extent = 0.7 (0.4-1.3)", rotation angle = 0
  Source counts = 12.5 +/- 4.4
  Background counts = 6.7
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 16:39:02 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:39:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:39:02 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:39:02 2011] Source does appear to be extended
[Mon Sep 26 16:39:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:39:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 16:39:26 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Mon Sep 26 16:39:26 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.039
[Mon Sep 26 16:39:26 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.72"
[Mon Sep 26 16:39:26 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6.ximg exists
[Mon Sep 26 16:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6.csv
[Mon Sep 26 16:39:26 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Sep 26 16:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6.csv
[Mon Sep 26 16:39:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06971_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:39:27 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Sep 26 16:39:27 2011] fullrun_ccd6_acisf06971_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Sep 26 16:39:27 2011] Fit fullrun_ccd6_acisf06971_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Sep 26 16:39:38 2011] Spatial fit model total counts = 19.004600, observed total counts = 19.000000
[Mon Sep 26 16:39:38 2011] Offset between fit and detection position for source 6 = 0.052432 pixels
[Mon Sep 26 16:39:38 2011] 19.073340 total counts/ 6.683840 bgd. counts: snr = 4.792264
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.052432 pixels
  Position = (333.5, 785.8) = 21 10 32.42 21 31 21.3
  Extent = 0.7 (0.4-1.3)", rotation angle = 0
  Source counts = 12.4 +/- 4.4
  Background counts = 6.7
  Rate = 0.0003 +/- 0.0001
[Mon Sep 26 16:39:38 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 16:39:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 16:39:38 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 16:39:38 2011] Source does appear to be extended
[Mon Sep 26 16:39:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:41:04 2011] Not overwriting source region fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.reg
[Mon Sep 26 16:41:04 2011] Extracting stamp from image fullrun_ccd6_acisf06971_pi14-548_cl_sm2.00.img.gz, (301, 753) - (366, 818)
[Mon Sep 26 16:41:04 2011] Writing fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6.gif
[Mon Sep 26 16:41:25 2011] ../../acisf06971/products/events/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.evt and ../../acisf06971/products/events/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Sep 26 16:41:25 2011] Size of ../../acisf06971/products/events/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts
[Mon Sep 26 16:41:25 2011] Mean chipx,y = (801.47, 647.00)
[Mon Sep 26 16:41:25 2011] Mean tdetx,y = (3676.47, 2349.00)
[Mon Sep 26 16:41:25 2011] chipx,y range = (787.00-818.00, 631.00-669.00)
[Mon Sep 26 16:41:25 2011] Size of ../../acisf06971/products/events/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 23 counts
[Mon Sep 26 16:41:26 2011] ../../acisf06971/products/images/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.img and ../../acisf06971/products/images/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Sep 26 16:41:26 2011] ../../acisf06971/products/spectra/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.pi and ../../acisf06971/products/spectra/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Sep 26 16:41:26 2011] Not generating rmf since there are only 12 counts
[Mon Sep 26 16:41:29 2011] ../../acisf06971/products/lightcurves/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.lc and ../../acisf06971/products/lightcurves/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Sep 26 16:41:50 2011] 201.246
[Mon Sep 26 16:43:34 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:43:34 2011] Error reading totcts from fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Sep 26 16:43:34 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:43:34 2011] Using photon index=1.80, rate=0.000272, arf fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6.arf
[Mon Sep 26 16:43:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:43:34 2011] Updating source flux to 2.9e-15
[Mon Sep 26 16:43:47 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 16:43:48 2011] acisf06971/analysis//spectral/fullrun_ccd6_acisf06971_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete