[Tue Oct 18 20:16:18 2011] Detection parameters:
  Position = (626.9, 380.5) = 11 47 11.09 55 42 44.6
  Extent = 0.8" x 0.6", rotation angle = 95 degrees
  Source counts = 23.6 +/- 5.4
  Background counts = 5.4
  Rate = 0.0005 +/- 0.0001

[Tue Oct 18 20:16:19 2011] Off-axis axis estimate = 2.93'
[Tue Oct 18 20:17:09 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:17:09 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Tue Oct 18 20:17:09 2011] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.101
[Tue Oct 18 20:17:09 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.57"
[Tue Oct 18 20:17:10 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13.ximg exists
[Tue Oct 18 20:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13.csv
[Tue Oct 18 20:17:10 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Oct 18 20:17:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13.csv
[Tue Oct 18 20:17:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06943_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:17:10 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Oct 18 20:17:10 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Oct 18 20:17:10 2011] Fit fullrun_ccd7_acisf06943_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Oct 18 20:17:20 2011] Spatial fit model total counts = 39.978100, observed total counts = 40.000000
[Tue Oct 18 20:17:20 2011] Offset between fit and detection position for source 3 = 0.828358 pixels
[Tue Oct 18 20:17:20 2011] 40.476900 total counts/ 23.808000 bgd. counts: snr = 3.416217
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.828358 pixels
  Position = (627.3, 381.2) = 11 47 11.10 55 42 44.7
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 16.7 +/- 6.4
  Background counts = 23.8
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 20:17:20 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:17:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:17:20 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:17:20 2011] Source does appear to be extended
[Tue Oct 18 20:17:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:17:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 20:17:39 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Oct 18 20:17:39 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.109
[Tue Oct 18 20:17:39 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.45"
[Tue Oct 18 20:17:40 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13.ximg exists
[Tue Oct 18 20:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13.csv
[Tue Oct 18 20:17:40 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Oct 18 20:17:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13.csv
[Tue Oct 18 20:17:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06943_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 20:17:40 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Oct 18 20:17:40 2011] fullrun_ccd7_acisf06943_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Oct 18 20:17:40 2011] Fit fullrun_ccd7_acisf06943_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Oct 18 20:17:50 2011] Spatial fit model total counts = 38.863100, observed total counts = 39.000000
[Tue Oct 18 20:17:50 2011] Offset between fit and detection position for source 3 = 0.026808 pixels
[Tue Oct 18 20:17:50 2011] 39.209800 total counts/ 22.325800 bgd. counts: snr = 3.573319
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.026808 pixels
  Position = (627.3, 381.2) = 11 47 11.10 55 42 44.7
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 16.9 +/- 6.3
  Background counts = 22.3
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 20:17:50 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 20:17:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 20:17:50 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 20:17:50 2011] Source does appear to be extended
[Tue Oct 18 20:17:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 20:19:28 2011] Not overwriting source region fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.reg
[Tue Oct 18 20:19:28 2011] Extracting stamp from image fullrun_ccd7_acisf06943_pi14-548_cl_sm2.00.img.gz, (606, 360) - (649, 403)
[Tue Oct 18 20:19:28 2011] Writing fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3.gif
[Tue Oct 18 20:20:02 2011] ../../acisf06943/products/events/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.evt and ../../acisf06943/products/events/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Oct 18 20:20:02 2011] Size of ../../acisf06943/products/events/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.evt.gz[events] = 22 counts
[Tue Oct 18 20:20:02 2011] Mean chipx,y = (463.27, 751.64)
[Tue Oct 18 20:20:02 2011] Mean tdetx,y = (4380.27, 2453.64)
[Tue Oct 18 20:20:02 2011] chipx,y range = (447.00-479.00, 730.00-768.00)
[Tue Oct 18 20:20:02 2011] Size of ../../acisf06943/products/events/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 36 counts
[Tue Oct 18 20:20:02 2011] ../../acisf06943/products/images/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.img and ../../acisf06943/products/images/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Oct 18 20:20:02 2011] ../../acisf06943/products/spectra/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.pi and ../../acisf06943/products/spectra/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Oct 18 20:20:02 2011] Not generating rmf since there are only 16 counts
[Tue Oct 18 20:20:04 2011] ../../acisf06943/products/lightcurves/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.lc and ../../acisf06943/products/lightcurves/fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Oct 18 20:20:43 2011] 222.579
[Tue Oct 18 20:20:46 2011] Updating aperture counts using extracted products
[Tue Oct 18 20:20:46 2011] Error reading totcts from fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Oct 18 20:20:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 20:20:47 2011] Using photon index=1.80, rate=0.000388, arf fullrun_ccd7_acisf06943_pi14-548_pass1_cl_src3.arf
[Tue Oct 18 20:20:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 20:20:47 2011] Updating source flux to 2.9e-15
[Tue Oct 18 20:21:18 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting