[Mon Sep 26 02:07:58 2011] Detection parameters:
  Position = (1080.9, 978.3) = 16 4 21.80 43 23 54.8
  Extent = 0.5" x 0.5", rotation angle = 92 degrees
  Source counts = 337.7 +/- 18.4
  Background counts = 1.3
  Rate = 0.01 +/- 0.0007

[Mon Sep 26 02:07:59 2011] Off-axis axis estimate = 2.47'
[Mon Sep 26 02:08:47 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:47 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Mon Sep 26 02:08:47 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.013
[Mon Sep 26 02:08:47 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.49"
[Mon Sep 26 02:08:48 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 02:08:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 02:08:48 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 02:08:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 02:08:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06933_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:08:48 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 02:08:48 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 02:08:48 2011] Fit fullrun_ccd3_acisf06933_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 02:08:57 2011] Spatial fit model total counts = 341.805000, observed total counts = 343.000000
[Mon Sep 26 02:08:57 2011] Offset between fit and detection position for source 2 = 0.711723 pixels
[Mon Sep 26 02:08:57 2011] 342.523900 total counts/ 11.836900 bgd. counts: snr = 96.116541
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.711723 pixels
  Position = (1081.4, 978.8) = 16 4 21.80 43 23 54.8
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 330.7 +/- 18.5
  Background counts = 11.8
  Rate = 0.01 +/- 0.0007
[Mon Sep 26 02:08:57 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:08:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:08:57 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 02:08:57 2011] Source does appear to be extended
[Mon Sep 26 02:08:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 02:09:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:09:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 02:09:17 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Sep 26 02:09:17 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.958
[Mon Sep 26 02:09:17 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.51"
[Mon Sep 26 02:09:18 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 02:09:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 02:09:18 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 02:09:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 02:09:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06933_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:09:19 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 02:09:19 2011] fullrun_ccd3_acisf06933_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 02:09:19 2011] Fit fullrun_ccd3_acisf06933_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 02:09:35 2011] Spatial fit model total counts = 339.047000, observed total counts = 343.000000
[Mon Sep 26 02:09:35 2011] Offset between fit and detection position for source 2 = 0.002736 pixels
[Mon Sep 26 02:09:35 2011] 339.002000 total counts/ 10.411000 bgd. counts: snr = 101.837901
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002736 pixels
  Position = (1081.4, 978.8) = 16 4 21.80 43 23 54.8
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 328.6 +/- 18.4
  Background counts = 10.4
  Rate = 0.01 +/- 0.0007
[Mon Sep 26 02:09:35 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 02:09:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 02:09:35 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 02:09:35 2011] Source does appear to be extended
[Mon Sep 26 02:09:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 02:11:53 2011] Not overwriting source region fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.reg
[Mon Sep 26 02:11:53 2011] Extracting stamp from image fullrun_ccd3_acisf06933_pi14-548_cl_sm2.00.img.gz, (1058, 955) - (1105, 1002)
[Mon Sep 26 02:11:53 2011] Writing fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2.gif
[Mon Sep 26 02:11:54 2011] ../../acisf06933/products/events/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.evt and ../../acisf06933/products/events/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Sep 26 02:11:54 2011] Size of ../../acisf06933/products/events/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.evt.gz[events] = 335 counts
[Mon Sep 26 02:11:54 2011] Mean chipx,y = (976.98, 709.74)
[Mon Sep 26 02:11:54 2011] Mean tdetx,y = (4422.26, 4037.98)
[Mon Sep 26 02:11:54 2011] chipx,y range = (958.00-995.00, 692.00-729.00)
[Mon Sep 26 02:11:54 2011] Size of ../../acisf06933/products/events/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 8 counts
[Mon Sep 26 02:11:54 2011] ../../acisf06933/products/images/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.img and ../../acisf06933/products/images/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Sep 26 02:11:54 2011] ../../acisf06933/products/spectra/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.pi and ../../acisf06933/products/spectra/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Sep 26 02:11:57 2011] ../../acisf06933/products/lightcurves/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.lc and ../../acisf06933/products/lightcurves/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Sep 26 02:13:00 2011] Keeping rmf generated by specextract
[Mon Sep 26 02:13:00 2011] 201.977
[Mon Sep 26 02:13:09 2011] Updating aperture counts using extracted products
[Mon Sep 26 02:13:09 2011] Error reading totcts from fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Sep 26 02:13:09 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 02:13:09 2011] Using photon index=1.80, rate=0.0123, arf fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 02:13:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 02:13:09 2011] Updating source flux to 1.4e-13
[Mon Sep 26 02:13:26 2011] Reading fit data from acisf06933/analysis//spectral/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_pl.csv
[Mon Sep 26 02:13:26 2011] Spectral fit parameter nH value = 4.42422e+13
[Mon Sep 26 02:13:26 2011] Spectral fit parameter PhoIndex value = 1.38781
[Mon Sep 26 02:13:26 2011] Failed to get F(0.3-8.0) from acisf06933/analysis//spectral/fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 02:13:26 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 02:13:26 2011] Using Nh = 4.4e+13, photon index=1.39, rate=0.0123, arf fullrun_ccd3_acisf06933_pi14-548_pass1_cl_src2.arf
[Mon Sep 26 02:13:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 02:13:26 2011] Updating source flux to 1.6e-13