[Sat Oct  8 03:01:09 2011] Detection parameters:
  Position = (708.1, 353.0) = 16 4 25.85 43 12 45.3
  Extent = 0.5" x 0.5", rotation angle = 144 degrees
  Source counts = 23.2 +/- 4.9
  Background counts = 0.8
  Rate = 0.0005 +/- 0.0001

[Sat Oct  8 03:01:10 2011] Off-axis axis estimate = 2.75'
[Sat Oct  8 03:02:04 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:02:04 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct  8 03:02:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.195
[Sat Oct  8 03:02:04 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.53"
[Sat Oct  8 03:02:06 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct  8 03:02:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13.csv
[Sat Oct  8 03:02:06 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct  8 03:02:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13.csv
[Sat Oct  8 03:02:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06932_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:02:06 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct  8 03:02:06 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct  8 03:02:06 2011] Fit fullrun_ccd3_acisf06932_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Oct  8 03:02:18 2011] Spatial fit model total counts = 27.775900, observed total counts = 28.000000
[Sat Oct  8 03:02:18 2011] Offset between fit and detection position for source 10 = 0.648324 pixels
[Sat Oct  8 03:02:18 2011] 27.394290 total counts/ 5.038290 bgd. counts: snr = 9.959844
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.648324 pixels
  Position = (708.5, 353.5) = 16 4 25.86 43 12 45.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 22.4 +/- 5.2
  Background counts = 5.0
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 03:02:18 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:02:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:02:18 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:02:18 2011] Source does appear to be extended
[Sat Oct  8 03:02:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:02:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:02:42 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sat Oct  8 03:02:42 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.191
[Sat Oct  8 03:02:42 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.43"
[Sat Oct  8 03:02:46 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct  8 03:02:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13.csv
[Sat Oct  8 03:02:46 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct  8 03:02:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13.csv
[Sat Oct  8 03:02:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06932_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:02:46 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct  8 03:02:46 2011] fullrun_ccd3_acisf06932_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct  8 03:02:46 2011] Fit fullrun_ccd3_acisf06932_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Oct  8 03:03:03 2011] Spatial fit model total counts = 27.529700, observed total counts = 28.000000
[Sat Oct  8 03:03:03 2011] Offset between fit and detection position for source 10 = 0.015235 pixels
[Sat Oct  8 03:03:03 2011] 27.039610 total counts/ 4.630910 bgd. counts: snr = 10.413183
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.015235 pixels
  Position = (708.5, 353.5) = 16 4 25.86 43 12 45.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.4 +/- 5.2
  Background counts = 4.6
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 03:03:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:03:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:03:03 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:03:03 2011] Source does appear to be extended
[Sat Oct  8 03:03:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:08:39 2011] Not overwriting source region fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.reg
[Sat Oct  8 03:08:39 2011] Extracting stamp from image fullrun_ccd3_acisf06932_pi14-548_cl_sm2.00.img.gz, (688, 333) - (729, 374)
[Sat Oct  8 03:08:39 2011] Writing fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10.gif
[Sat Oct  8 03:10:10 2011] ../../acisf06932/products/events/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.evt and ../../acisf06932/products/events/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct  8 03:10:10 2011] Size of ../../acisf06932/products/events/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.evt.gz[events] = 24 counts
[Sat Oct  8 03:10:10 2011] Mean chipx,y = (688.50, 805.54)
[Sat Oct  8 03:10:10 2011] Mean tdetx,y = (4326.46, 3749.50)
[Sat Oct  8 03:10:10 2011] chipx,y range = (672.00-707.00, 791.00-824.00)
[Sat Oct  8 03:10:10 2011] Size of ../../acisf06932/products/events/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 12 counts
[Sat Oct  8 03:10:10 2011] ../../acisf06932/products/images/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.img and ../../acisf06932/products/images/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct  8 03:10:10 2011] Not generating rmf since there are only 22 counts
[Sat Oct  8 03:10:10 2011] arf not found, will run specextract
[Sat Oct  8 03:10:12 2011] ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_bkg.pi not found
[Sat Oct  8 03:10:12 2011] ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10.warf not found
[Sat Oct  8 03:10:12 2011] ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10.wrmf not found
[Sat Oct  8 03:10:12 2011] Removal of ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10.soff failed
[Sat Oct  8 03:10:12 2011] Failed to rename ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_grp.pi to ../../acisf06932/products/spectra/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.pi
[Sat Oct  8 03:10:17 2011] ../../acisf06932/products/lightcurves/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.lc and ../../acisf06932/products/lightcurves/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct  8 03:11:09 2011] No arf file found
[Sat Oct  8 03:11:32 2011] Updating aperture counts using extracted products
[Sat Oct  8 03:11:33 2011] Error reading totcts from fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_src.pi
[Sat Oct  8 03:11:33 2011] No arf file for this source, not re-computing flux
[Sat Oct  8 03:11:38 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  8 03:11:39 2011] acisf06932/analysis//spectral/fullrun_ccd3_acisf06932_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete