[Sat Oct  8 03:01:04 2011] Detection parameters:
  Position = (635.5, 783.4) = 16 4 10.01 43 4 37.4
  Extent = 0.8" x 0.6", rotation angle = 131 degrees
  Source counts = 71.9 +/- 8.7
  Background counts = 3.1
  Rate = 0.001 +/- 0.0002

[Sat Oct  8 03:01:05 2011] Off-axis axis estimate = 5.89'
[Sat Oct  8 03:01:58 2011] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:01:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:01:58 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Sat Oct  8 03:01:58 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.893
[Sat Oct  8 03:01:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.58"
[Sat Oct  8 03:01:59 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 03:01:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:01:59 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 03:01:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 03:01:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06932_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:01:59 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 03:01:59 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:01:59 2011] Fit fullrun_ccd0_acisf06932_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:02:12 2011] Spatial fit model total counts = 92.811200, observed total counts = 92.000000
[Sat Oct  8 03:02:12 2011] Offset between fit and detection position for source 1 = 0.436661 pixels
[Sat Oct  8 03:02:12 2011] 92.625500 total counts/ 20.694400 bgd. counts: snr = 15.812127
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.436661 pixels
  Position = (635.9, 783.6) = 16 4 10.02 43 4 37.2
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 71.9 +/- 9.6
  Background counts = 20.7
  Rate = 0.001 +/- 0.0002
[Sat Oct  8 03:02:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:02:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:02:12 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:02:12 2011] Source does appear to be extended
[Sat Oct  8 03:02:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:02:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 03:02:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 03:02:36 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Sat Oct  8 03:02:36 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.118
[Sat Oct  8 03:02:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.26"
[Sat Oct  8 03:02:37 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 03:02:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:02:37 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 03:02:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 03:02:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06932_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 03:02:37 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 03:02:37 2011] fullrun_ccd0_acisf06932_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 03:02:37 2011] Fit fullrun_ccd0_acisf06932_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  8 03:02:53 2011] Spatial fit model total counts = 86.361000, observed total counts = 86.000000
[Sat Oct  8 03:02:53 2011] Offset between fit and detection position for source 1 = 0.018614 pixels
[Sat Oct  8 03:02:53 2011] 86.355000 total counts/ 15.479600 bgd. counts: snr = 18.014228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018614 pixels
  Position = (635.9, 783.5) = 16 4 10.02 43 4 37.2
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 70.9 +/- 9.3
  Background counts = 15.5
  Rate = 0.001 +/- 0.0002
[Sat Oct  8 03:02:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 03:02:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 03:02:53 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 03:02:53 2011] Source does appear to be extended
[Sat Oct  8 03:02:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 03:03:21 2011] Not overwriting source region fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  8 03:03:21 2011] Extracting stamp from image fullrun_ccd0_acisf06932_pi14-548_cl_sm2.00.img.gz, (579, 726) - (693, 841)
[Sat Oct  8 03:03:21 2011] Writing fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1.gif
[Sat Oct  8 03:03:22 2011] ../../acisf06932/products/events/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.evt and ../../acisf06932/products/events/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  8 03:03:22 2011] Size of ../../acisf06932/products/events/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.evt.gz[events] = 84 counts
[Sat Oct  8 03:03:22 2011] Mean chipx,y = (593.05, 562.31)
[Sat Oct  8 03:03:22 2011] Mean tdetx,y = (3623.31, 4538.95)
[Sat Oct  8 03:03:22 2011] chipx,y range = (570.00-616.00, 542.00-583.00)
[Sat Oct  8 03:03:22 2011] Size of ../../acisf06932/products/events/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 50 counts
[Sat Oct  8 03:03:22 2011] ../../acisf06932/products/images/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.img and ../../acisf06932/products/images/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  8 03:03:22 2011] Not generating rmf since there are only 70 counts
[Sat Oct  8 03:03:22 2011] arf not found, will run specextract
[Sat Oct  8 03:03:24 2011] ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_bkg.pi not found
[Sat Oct  8 03:03:24 2011] ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1.warf not found
[Sat Oct  8 03:03:24 2011] ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct  8 03:03:24 2011] Removal of ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1.soff failed
[Sat Oct  8 03:03:24 2011] Failed to rename ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_grp.pi to ../../acisf06932/products/spectra/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.pi
[Sat Oct  8 03:03:30 2011] ../../acisf06932/products/lightcurves/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.lc and ../../acisf06932/products/lightcurves/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  8 03:04:40 2011] No arf file found
[Sat Oct  8 03:11:32 2011] Updating aperture counts using extracted products
[Sat Oct  8 03:11:32 2011] Error reading totcts from fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_src.pi
[Sat Oct  8 03:11:32 2011] No arf file for this source, not re-computing flux
[Sat Oct  8 03:11:35 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  8 03:11:36 2011] acisf06932/analysis//spectral/fullrun_ccd0_acisf06932_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete