[Wed Oct  5 17:10:47 2011] Detection parameters:
  Position = (467.5, 662.4) = 13 11 30.47 -1 20 43.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 26.5 +/- 11.1
  Background counts = 96.5
  Rate = 0.0003 +/- 0.0001

[Wed Oct  5 17:10:49 2011] Off-axis axis estimate = 3.44'
[Wed Oct  5 17:12:39 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:12:39 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Oct  5 17:12:39 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.640
[Wed Oct  5 17:12:39 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.68"
[Wed Oct  5 17:12:40 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22.ximg exists
[Wed Oct  5 17:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22.csv
[Wed Oct  5 17:12:40 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22_1.ximg exists
[Wed Oct  5 17:12:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22.csv
[Wed Oct  5 17:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:12:41 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Wed Oct  5 17:12:41 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Oct  5 17:12:41 2011] Fit fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Oct  5 17:12:58 2011] Spatial fit model total counts = 920.938000, observed total counts = 920.000000
[Wed Oct  5 17:12:58 2011] Offset between fit and detection position for source 27 = 6.086418 pixels
[Wed Oct  5 17:12:58 2011] 935.251200 total counts/ 871.266000 bgd. counts: snr = 2.167725
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 6.086418 pixels
  Position = (461.5, 661.4) = 13 11 30.69 -1 20 44.7
  Extent = 1.5 (1.4-3.0)", rotation angle = 0
  Source counts = 64.0 +/- 30.6
  Background counts = 871.3
  Rate = 0.0008 +/- 0.0004
[Wed Oct  5 17:12:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:12:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:12:58 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:12:58 2011] Source does appear to be extended
[Wed Oct  5 17:12:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:13:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:13:22 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Oct  5 17:13:22 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Wed Oct  5 17:13:22 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 1.50"
[Wed Oct  5 17:13:24 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21.ximg exists
[Wed Oct  5 17:13:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21.csv
[Wed Oct  5 17:13:24 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21_1.ximg exists
[Wed Oct  5 17:13:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21.csv
[Wed Oct  5 17:13:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06930_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:13:24 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Wed Oct  5 17:13:24 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Oct  5 17:13:24 2011] Fit fullrun_ccd3_acisf06930_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Oct  5 17:13:38 2011] Spatial fit model total counts = 951.504000, observed total counts = 952.000000
[Wed Oct  5 17:13:38 2011] Offset between fit and detection position for source 27 = 9.520480 pixels
[Wed Oct  5 17:13:38 2011] 945.867000 total counts/ 691.764000 bgd. counts: snr = 9.661194
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 9.520480 pixels
  Position = (471.0, 661.1) = 13 11 30.37 -1 20 44.8
  Extent = 3.0 (2.9-3.0)", rotation angle = 0
  Source counts = 254.1 +/- 30.8
  Background counts = 691.8
  Rate = 0.003 +/- 0.0004
[Wed Oct  5 17:13:38 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:13:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:13:38 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:13:38 2011] Source does appear to be extended
[Wed Oct  5 17:13:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:18:56 2011] Not overwriting source region fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.reg
[Wed Oct  5 17:18:56 2011] Extracting stamp from image fullrun_ccd3_acisf06930_pi14-548_cl_sm2.00.img.gz, (335, 525) - (607, 797)
[Wed Oct  5 17:18:56 2011] Writing fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27.gif
[Wed Oct  5 17:20:14 2011] ../../acisf06930/products/events/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.evt and ../../acisf06930/products/events/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Wed Oct  5 17:20:14 2011] Size of ../../acisf06930/products/events/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.evt.gz[events] = 6919 counts
[Wed Oct  5 17:20:14 2011] Mean chipx,y = (642.24, 590.11)
[Wed Oct  5 17:20:14 2011] Mean tdetx,y = (4541.89, 3703.24)
[Wed Oct  5 17:20:14 2011] chipx,y range = (605.00-686.00, 546.00-629.00)
[Wed Oct  5 17:20:14 2011] Size of ../../acisf06930/products/events/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 35222 counts
[Wed Oct  5 17:20:14 2011] ../../acisf06930/products/images/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.img and ../../acisf06930/products/images/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Wed Oct  5 17:20:14 2011] ../../acisf06930/products/spectra/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.pi and ../../acisf06930/products/spectra/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Wed Oct  5 17:20:22 2011] ../../acisf06930/products/lightcurves/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.lc and ../../acisf06930/products/lightcurves/fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Wed Oct  5 17:20:23 2011] Keeping rmf generated by specextract
[Wed Oct  5 17:20:23 2011] 197.059
[Wed Oct  5 17:20:37 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:20:37 2011] Error reading totcts from fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27_src.pi.gz
[Wed Oct  5 17:20:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:20:37 2011] Using photon index=1.80, rate=0.00334, arf fullrun_ccd3_acisf06930_pi14-548_pass1_cl_src27.arf
[Wed Oct  5 17:20:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:20:37 2011] Updating source flux to 3.9e-14