[Wed Oct  5 17:10:46 2011] Detection parameters:
  Position = (469.5, 658.5) = 13 11 30.41 -1 20 45.9
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 13.7 +/- 8.5
  Background counts = 59.3
  Rate = 0.0002 +/- 0.0001

[Wed Oct  5 17:10:49 2011] Off-axis axis estimate = 3.47'
[Wed Oct  5 17:12:39 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:12:39 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Wed Oct  5 17:12:39 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.628
[Wed Oct  5 17:12:39 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 0.68"
[Wed Oct  5 17:12:40 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34.ximg exists
[Wed Oct  5 17:12:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34.csv
[Wed Oct  5 17:12:40 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34_1.ximg exists
[Wed Oct  5 17:12:40 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34.csv
[Wed Oct  5 17:12:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06930_pi14-548_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:12:41 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34.ximg exists
[Wed Oct  5 17:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34.csv
[Wed Oct  5 17:12:41 2011] fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Oct  5 17:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34.csv
[Wed Oct  5 17:12:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06930_pi14-548_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:12:58 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 24.708969 pixels away
[Wed Oct  5 17:12:58 2011] Warning, spatial fit 34 centroid is now closest to src. 24
[Wed Oct  5 17:12:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:12:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:12:58 2011] Assessing source extent using major
[Wed Oct  5 17:12:58 2011] Source does appear to be extended
[Wed Oct  5 17:12:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:12:58 2011] Deleting source due to low Poisson probability 0.8