[Wed Oct  5 17:10:37 2011] Detection parameters:
  Position = (915.3, 799.5) = 13 11 56.76 -1 13 11.2
  Extent = 1.8" x 1.5", rotation angle = 156 degrees
  Source counts = 332.2 +/- 18.9
  Background counts = 25.8
  Rate = 0.004 +/- 0.0002

[Wed Oct  5 17:10:39 2011] Off-axis axis estimate = 7.28'
[Wed Oct  5 17:12:33 2011] Using EEF radius (= 2.35 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:12:33 2011] Initial guess for spatial extent in simple fitting = 2.35"
[Wed Oct  5 17:12:33 2011] source mask rpix=4.8, npix_max = 111, mask sum = 121, frac = 1.084
[Wed Oct  5 17:12:33 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.35"
[Wed Oct  5 17:12:35 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct  5 17:12:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 17:12:35 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct  5 17:12:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3.csv
[Wed Oct  5 17:12:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06930_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:12:35 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 17:12:35 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 17:12:35 2011] Fit fullrun_ccd0_acisf06930_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 17:12:48 2011] Spatial fit model total counts = 351.579000, observed total counts = 349.000000
[Wed Oct  5 17:12:48 2011] Offset between fit and detection position for source 3 = 0.856981 pixels
[Wed Oct  5 17:12:48 2011] 350.604000 total counts/ 17.321000 bgd. counts: snr = 80.080482
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.856981 pixels
  Position = (915.9, 800.1) = 13 11 56.76 -1 13 11.2
  Extent = 2.4 (2.2-2.6)", rotation angle = 0
  Source counts = 333.3 +/- 18.7
  Background counts = 17.3
  Rate = 0.004 +/- 0.0002
[Wed Oct  5 17:12:48 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:12:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:12:48 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:12:48 2011] Source does appear to be extended
[Wed Oct  5 17:12:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:13:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:13:17 2011] Initial guess for spatial extent in simple fitting = 2.38"
[Wed Oct  5 17:13:17 2011] source mask rpix=4.8, npix_max = 114, mask sum = 100, frac = 0.877
[Wed Oct  5 17:13:17 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.38"
[Wed Oct  5 17:13:18 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct  5 17:13:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 17:13:18 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct  5 17:13:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3.csv
[Wed Oct  5 17:13:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06930_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:13:18 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 17:13:18 2011] fullrun_ccd0_acisf06930_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 17:13:18 2011] Fit fullrun_ccd0_acisf06930_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 17:13:30 2011] Spatial fit model total counts = 351.678000, observed total counts = 352.000000
[Wed Oct  5 17:13:30 2011] Offset between fit and detection position for source 3 = 0.111268 pixels
[Wed Oct  5 17:13:30 2011] 350.729000 total counts/ 17.872000 bgd. counts: snr = 78.735596
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.111268 pixels
  Position = (916.0, 800.1) = 13 11 56.75 -1 13 11.2
  Extent = 2.4 (2.1-2.6)", rotation angle = 0
  Source counts = 332.9 +/- 18.7
  Background counts = 17.9
  Rate = 0.004 +/- 0.0002
[Wed Oct  5 17:13:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:13:30 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:13:30 2011] Source does appear to be extended
[Wed Oct  5 17:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:13:59 2011] Not overwriting source region fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.reg
[Wed Oct  5 17:13:59 2011] Extracting stamp from image fullrun_ccd0_acisf06930_pi14-548_cl_sm2.00.img.gz, (805, 689) - (1027, 911)
[Wed Oct  5 17:13:59 2011] Writing fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3.gif
[Wed Oct  5 17:14:08 2011] ../../acisf06930/products/events/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.evt and ../../acisf06930/products/events/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct  5 17:14:08 2011] Size of ../../acisf06930/products/events/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.evt.gz[events] = 366 counts
[Wed Oct  5 17:14:08 2011] Mean chipx,y = (846.16, 401.90)
[Wed Oct  5 17:14:08 2011] Mean tdetx,y = (3462.90, 4285.84)
[Wed Oct  5 17:14:08 2011] chipx,y range = (815.00-879.00, 372.00-431.00)
[Wed Oct  5 17:14:08 2011] Size of ../../acisf06930/products/events/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 251 counts
[Wed Oct  5 17:14:08 2011] ../../acisf06930/products/images/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.img and ../../acisf06930/products/images/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct  5 17:14:08 2011] ../../acisf06930/products/spectra/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.pi and ../../acisf06930/products/spectra/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct  5 17:14:12 2011] ../../acisf06930/products/lightcurves/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.lc and ../../acisf06930/products/lightcurves/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct  5 17:15:17 2011] Keeping rmf generated by specextract
[Wed Oct  5 17:15:17 2011] 177.52
[Wed Oct  5 17:20:35 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:20:35 2011] Error reading totcts from fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct  5 17:20:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:20:35 2011] Using photon index=1.80, rate=0.00437, arf fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 17:20:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:20:35 2011] Updating source flux to 5.6e-14
[Wed Oct  5 17:20:48 2011] Reading fit data from acisf06930/analysis//spectral/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct  5 17:20:48 2011] Spectral fit parameter nH value = 5.07736e+21
[Wed Oct  5 17:20:48 2011] Spectral fit parameter PhoIndex value = 6.64287
[Wed Oct  5 17:20:48 2011] Failed to get F(0.3-8.0) from acisf06930/analysis//spectral/fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 17:20:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:20:48 2011] Using Nh = 5.1e+21, photon index=6.64, rate=0.00437, arf fullrun_ccd0_acisf06930_pi14-548_pass1_cl_src3.arf
[Wed Oct  5 17:20:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:20:48 2011] Updating source flux to 4.4e-14