[Fri Feb 24 20:29:23 2012] Detection parameters:
  Position = (1046.0, 925.4) = 21 7 53.81 -6 23 45.2
  Extent = 0.8" x 0.5", rotation angle = 132 degrees
  Source counts = 39.6 +/- 6.3
  Background counts = 0.4
  Rate = 0.004 +/- 0.0007

[Fri Feb 24 20:29:24 2012] Off-axis axis estimate = 3.59'
[Fri Feb 24 20:44:59 2012] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 20:44:59 2012] Initial guess for spatial extent in simple fitting = 0.72"
[Fri Feb 24 20:44:59 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.048
[Fri Feb 24 20:44:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.72"
[Fri Feb 24 20:51:47 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3.ximg exists
[Fri Feb 24 20:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3.csv
[Fri Feb 24 20:51:47 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Feb 24 20:51:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3.csv
[Fri Feb 24 20:51:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06887_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 20:51:47 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 24 20:51:47 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 24 20:51:47 2012] Fit fullrun_ccd6_acisf06887_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 24 20:59:50 2012] Spatial fit model total counts = 41.862000, observed total counts = 41.000000
[Fri Feb 24 20:59:50 2012] Offset between fit and detection position for source 2 = 0.891807 pixels
[Fri Feb 24 20:59:50 2012] 41.517300 total counts/ 0.000000 bgd. counts: snr = 6608329478928753.000000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.891807 pixels
  Position = (1046.4, 926.2) = 21 7 53.81 -6 23 45.0
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 41.5 +/- 6.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0007
[Fri Feb 24 20:59:50 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 20:59:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 20:59:50 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 20:59:50 2012] Source does appear to be extended
[Fri Feb 24 20:59:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 21:12:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 21:12:35 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Fri Feb 24 21:12:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Fri Feb 24 21:12:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.92"
[Fri Feb 24 21:19:49 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3.ximg exists
[Fri Feb 24 21:19:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3.csv
[Fri Feb 24 21:19:49 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Feb 24 21:19:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3.csv
[Fri Feb 24 21:19:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06887_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 21:19:49 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 24 21:19:49 2012] fullrun_ccd6_acisf06887_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 24 21:19:49 2012] Fit fullrun_ccd6_acisf06887_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 24 21:28:03 2012] Spatial fit model total counts = 39.518600, observed total counts = 41.000000
[Fri Feb 24 21:28:03 2012] Offset between fit and detection position for source 2 = 0.072592 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.072592 pixels
  Position = (1046.4, 926.2) = 21 7 53.81 -6 23 45.0
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 39.1 +/- 6.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0007
[Fri Feb 24 21:28:03 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 21:28:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 21:28:03 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 21:28:03 2012] Source does appear to be extended
[Fri Feb 24 21:28:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 21:28:37 2012] Writing source region out to fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_src.reg
[Fri Feb 24 21:28:37 2012] Extracting stamp from image fullrun_ccd6_acisf06887_pi14-548_cl_sm2.00.img.gz, (1004, 884) - (1089, 969)
[Fri Feb 24 21:28:37 2012] Writing fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2.gif
[Fri Feb 24 21:28:52 2012] Size of ../../acisf06887/products/events/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_src.evt.gz[events] = 40 counts
[Fri Feb 24 21:28:52 2012] Mean chipx,y = (912.62, 781.55)
[Fri Feb 24 21:28:52 2012] Mean tdetx,y = (3787.62, 2483.55)
[Fri Feb 24 21:28:52 2012] chipx,y range = (893.00-927.00, 761.00-803.00)
[Fri Feb 24 21:28:52 2012] Size of ../../acisf06887/products/events/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 8 counts
[Fri Feb 24 21:28:53 2012] Not generating rmf since there are only 39 counts
[Fri Feb 24 21:28:53 2012] arf not found, will run specextract
[Fri Feb 24 21:28:55 2012] ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_bkg.pi not found
[Fri Feb 24 21:28:55 2012] ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2.warf not found
[Fri Feb 24 21:28:55 2012] ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2.wrmf not found
[Fri Feb 24 21:28:55 2012] Removal of ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2.soff failed
[Fri Feb 24 21:28:55 2012] Failed to rename ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_grp.pi to ../../acisf06887/products/spectra/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_src.pi
[Fri Feb 24 21:30:36 2012] No arf file found
[Fri Feb 24 21:32:31 2012] Updating aperture counts using extracted products
[Fri Feb 24 21:32:31 2012] Error reading totcts from fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_src.pi
[Fri Feb 24 21:32:31 2012] No arf file for this source, not re-computing flux
[Fri Feb 24 21:32:36 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 24 21:32:37 2012] acisf06887/analysis//spectral/fullrun_ccd6_acisf06887_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete