[Fri Sep 30 07:09:18 2011] Detection parameters:
  Position = (1084.7, 749.1) = 2 25 25.68 -4 35 9.5
  Extent = 0.8" x 0.5", rotation angle = 67 degrees
  Source counts = 36.8 +/- 6.2
  Background counts = 1.2
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 07:09:18 2011] Off-axis axis estimate = 2.98'
[Fri Sep 30 07:10:13 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:10:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 07:10:13 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Sep 30 07:10:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.076
[Fri Sep 30 07:10:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.58"
[Fri Sep 30 07:10:14 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 07:10:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 07:10:14 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 07:10:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 07:10:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06864_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:10:16 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 07:10:17 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 07:10:17 2011] Fit fullrun_ccd6_acisf06864_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 07:10:25 2011] Spatial fit model total counts = 38.957500, observed total counts = 39.000000
[Fri Sep 30 07:10:25 2011] Offset between fit and detection position for source 20 = 0.802444 pixels
[Fri Sep 30 07:10:25 2011] 38.740050 total counts/ 2.778750 bgd. counts: snr = 21.573005
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.802444 pixels
  Position = (1085.2, 749.7) = 2 25 25.68 -4 35 9.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 36.0 +/- 6.2
  Background counts = 2.8
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 07:10:25 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:10:25 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:10:25 2011] Source does appear to be extended
[Fri Sep 30 07:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:10:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 07:10:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 07:10:56 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Fri Sep 30 07:10:56 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.008
[Fri Sep 30 07:10:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.73"
[Fri Sep 30 07:10:57 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 07:10:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 07:10:57 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 07:10:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 07:10:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06864_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 07:10:57 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 07:10:57 2011] fullrun_ccd6_acisf06864_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 07:10:57 2011] Fit fullrun_ccd6_acisf06864_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 07:11:07 2011] Spatial fit model total counts = 39.396500, observed total counts = 39.000000
[Fri Sep 30 07:11:07 2011] Offset between fit and detection position for source 20 = 0.005913 pixels
[Fri Sep 30 07:11:07 2011] 39.194210 total counts/ 2.770510 bgd. counts: snr = 21.882866
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.005913 pixels
  Position = (1085.2, 749.7) = 2 25 25.68 -4 35 9.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 36.4 +/- 6.3
  Background counts = 2.8
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 07:11:07 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 07:11:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 07:11:07 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 07:11:07 2011] Source does appear to be extended
[Fri Sep 30 07:11:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 07:12:45 2011] Not overwriting source region fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.reg
[Fri Sep 30 07:12:45 2011] Extracting stamp from image fullrun_ccd6_acisf06864_pi14-548_cl_sm2.00.img.gz, (1051, 716) - (1119, 784)
[Fri Sep 30 07:12:45 2011] Writing fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20.gif
[Fri Sep 30 07:12:46 2011] ../../acisf06864/products/events/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.evt and ../../acisf06864/products/events/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Fri Sep 30 07:12:46 2011] Size of ../../acisf06864/products/events/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.evt.gz[events] = 37 counts
[Fri Sep 30 07:12:46 2011] Mean chipx,y = (906.49, 626.62)
[Fri Sep 30 07:12:46 2011] Mean tdetx,y = (3781.49, 2328.62)
[Fri Sep 30 07:12:46 2011] chipx,y range = (883.00-920.00, 605.00-643.00)
[Fri Sep 30 07:12:46 2011] Size of ../../acisf06864/products/events/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 11 counts
[Fri Sep 30 07:12:46 2011] ../../acisf06864/products/images/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.img and ../../acisf06864/products/images/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Fri Sep 30 07:12:46 2011] Not generating rmf since there are only 36 counts
[Fri Sep 30 07:12:46 2011] arf not found, will run specextract
[Fri Sep 30 07:12:47 2011] ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_bkg.pi not found
[Fri Sep 30 07:12:47 2011] ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20.warf not found
[Fri Sep 30 07:12:47 2011] ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20.wrmf not found
[Fri Sep 30 07:12:47 2011] Removal of ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20.soff failed
[Fri Sep 30 07:12:47 2011] Failed to rename ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_grp.pi to ../../acisf06864/products/spectra/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.pi
[Fri Sep 30 07:12:53 2011] ../../acisf06864/products/lightcurves/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.lc and ../../acisf06864/products/lightcurves/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Fri Sep 30 07:14:42 2011] No arf file found
[Fri Sep 30 07:18:25 2011] Updating aperture counts using extracted products
[Fri Sep 30 07:18:25 2011] Error reading totcts from fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_src.pi
[Fri Sep 30 07:18:25 2011] No arf file for this source, not re-computing flux
[Fri Sep 30 07:18:35 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 07:18:36 2011] acisf06864/analysis//spectral/fullrun_ccd6_acisf06864_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete