[Wed Oct 26 22:17:48 2011] Detection parameters:
  Position = (78.8, 230.8) = 20 55 20.48 -69 4 37.2
  Extent = 1.5" x 1.0", rotation angle = 130 degrees
  Source counts = 121.4 +/- 11.6
  Background counts = 12.6
  Rate = 0.006 +/- 0.0006

[Wed Oct 26 22:17:50 2011] Off-axis axis estimate = 6.81'
[Wed Oct 26 22:18:27 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 22:18:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 22:18:27 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Wed Oct 26 22:18:27 2011] source mask rpix=4.2, npix_max = 88, mask sum = 100, frac = 1.131
[Wed Oct 26 22:18:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.07"
[Wed Oct 26 22:18:28 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 26 22:18:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 22:18:28 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 26 22:18:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1.csv
[Wed Oct 26 22:18:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06848_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 22:18:28 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 26 22:18:28 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 26 22:18:28 2011] Fit fullrun_ccd7_acisf06848_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 26 22:18:36 2011] Spatial fit model total counts = 137.808000, observed total counts = 138.000000
[Wed Oct 26 22:18:36 2011] Offset between fit and detection position for source 1 = 0.685378 pixels
[Wed Oct 26 22:18:36 2011] 136.757100 total counts/ 21.459100 bgd. counts: snr = 24.889491
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.685378 pixels
  Position = (78.6, 231.5) = 20 55 20.54 -69 4 37.2
  Extent = 2.4 (2.0-2.8)", rotation angle = 0
  Source counts = 115.3 +/- 11.7
  Background counts = 21.5
  Rate = 0.006 +/- 0.0006
[Wed Oct 26 22:18:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 22:18:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 22:18:36 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 22:18:36 2011] Source does appear to be extended
[Wed Oct 26 22:18:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 22:18:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 22:18:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 22:18:52 2011] Initial guess for spatial extent in simple fitting = 2.35"
[Wed Oct 26 22:18:52 2011] source mask rpix=4.8, npix_max = 111, mask sum = 121, frac = 1.086
[Wed Oct 26 22:18:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.35"
[Wed Oct 26 22:18:53 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 26 22:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 22:18:53 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 26 22:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1.csv
[Wed Oct 26 22:18:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06848_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 22:18:53 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 26 22:18:53 2011] fullrun_ccd7_acisf06848_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 26 22:18:53 2011] Fit fullrun_ccd7_acisf06848_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 26 22:19:00 2011] Spatial fit model total counts = 143.701000, observed total counts = 144.000000
[Wed Oct 26 22:19:00 2011] Offset between fit and detection position for source 1 = 0.245569 pixels
[Wed Oct 26 22:19:00 2011] 143.286700 total counts/ 26.943700 bgd. counts: snr = 22.413601
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.245569 pixels
  Position = (78.7, 231.2) = 20 55 20.53 -69 4 37.3
  Extent = 2.4 (2.0-2.8)", rotation angle = 0
  Source counts = 116.3 +/- 12.0
  Background counts = 26.9
  Rate = 0.006 +/- 0.0006
[Wed Oct 26 22:19:00 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 22:19:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 22:19:00 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 22:19:00 2011] Source does appear to be extended
[Wed Oct 26 22:19:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 22:20:18 2011] Not overwriting source region fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 22:20:18 2011] Extracting stamp from image fullrun_ccd7_acisf06848_pi14-548_cl_sm2.00.img.gz, (0, 123) - (187, 339)
[Wed Oct 26 22:20:18 2011] Writing fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 22:20:19 2011] ../../acisf06848/products/events/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.evt and ../../acisf06848/products/events/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 22:20:20 2011] Size of ../../acisf06848/products/events/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.evt.gz[events] = 139 counts
[Wed Oct 26 22:20:20 2011] Mean chipx,y = (964.79, 172.50)
[Wed Oct 26 22:20:20 2011] Mean tdetx,y = (4881.79, 1874.50)
[Wed Oct 26 22:20:20 2011] chipx,y range = (937.00-992.00, 142.00-196.00)
[Wed Oct 26 22:20:20 2011] Size of ../../acisf06848/products/events/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 180 counts
[Wed Oct 26 22:20:20 2011] ../../acisf06848/products/images/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.img and ../../acisf06848/products/images/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 22:20:20 2011] ../../acisf06848/products/spectra/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.pi and ../../acisf06848/products/spectra/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 22:20:22 2011] ../../acisf06848/products/lightcurves/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.lc and ../../acisf06848/products/lightcurves/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 22:21:33 2011] Keeping rmf generated by specextract
[Wed Oct 26 22:21:33 2011] 204.723
[Wed Oct 26 22:21:36 2011] Updating aperture counts using extracted products
[Wed Oct 26 22:21:36 2011] Error reading totcts from fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 22:21:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 22:21:36 2011] Using photon index=1.80, rate=0.00616, arf fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 22:21:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 22:21:36 2011] Updating source flux to 5e-14
[Wed Oct 26 22:21:48 2011] Reading fit data from acisf06848/analysis//spectral/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 26 22:21:48 2011] Spectral fit parameter nH value = 7.00899e+13
[Wed Oct 26 22:21:48 2011] Spectral fit parameter PhoIndex value = 1.95784
[Wed Oct 26 22:21:48 2011] Failed to get F(0.3-8.0) from acisf06848/analysis//spectral/fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 26 22:21:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 22:21:48 2011] Using Nh = 7e+13, photon index=1.96, rate=0.00616, arf fullrun_ccd7_acisf06848_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 22:21:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 22:21:48 2011] Updating source flux to 4.7e-14