[Fri Oct  7 15:17:19 2011] Detection parameters:
  Position = (90.2, 715.7) = 3 5 10.96 -27 35 0.7
  Extent = 0.7" x 0.6", rotation angle = 156 degrees
  Source counts = 30.2 +/- 5.7
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002

[Fri Oct  7 15:17:20 2011] Off-axis axis estimate = 5.69'
[Fri Oct  7 15:18:17 2011] Using EEF radius (= 1.48 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 15:18:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 15:18:17 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Fri Oct  7 15:18:17 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Fri Oct  7 15:18:17 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.48"
[Fri Oct  7 15:18:17 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct  7 15:18:17 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct  7 15:18:17 2011] Fit fullrun_ccd6_acisf06847_pi14-548_cl_pass0_src4 appears to have run properly
[Fri Oct  7 15:18:18 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct  7 15:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4.csv
[Fri Oct  7 15:18:18 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct  7 15:18:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4.csv
[Fri Oct  7 15:18:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06847_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 15:18:26 2011] Spatial fit model total counts = 51.887300, observed total counts = 53.000000
[Fri Oct  7 15:18:26 2011] Offset between fit and detection position for source 6 = 1.286911 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.286911 pixels
  Position = (90.4, 717.0) = 3 5 10.97 -27 35 0.4
  Extent = 3.0 (2.6-5.9)" x 1.4 (1.0-1.8)", rotation angle = 67 (49-78) degrees
  Source counts = 51.9 +/- 7.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 15:18:26 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 15:18:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 15:18:26 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 15:18:26 2011] Source does appear to be extended
[Fri Oct  7 15:18:26 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.45
[Fri Oct  7 15:18:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 15:18:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 15:18:42 2011] Initial guess for spatial extent in simple fitting = 2.19"
[Fri Oct  7 15:18:42 2011] source mask rpix=4.4, npix_max = 98, mask sum = 100, frac = 1.020
[Fri Oct  7 15:18:42 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.19"
[Fri Oct  7 15:18:45 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct  7 15:18:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 15:18:45 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct  7 15:18:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 15:18:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06847_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 15:18:48 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct  7 15:18:48 2011] fullrun_ccd6_acisf06847_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct  7 15:18:48 2011] Fit fullrun_ccd6_acisf06847_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct  7 15:18:58 2011] Spatial fit model total counts = 65.639200, observed total counts = 65.000000
[Fri Oct  7 15:18:58 2011] Offset between fit and detection position for source 6 = 3.452059 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.452059 pixels
  Position = (88.4, 719.8) = 3 5 11.05 -27 34 59.0
  Extent = 2.1 (1.9-2.5)", rotation angle = 0
  Source counts = 65.6 +/- 8.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Fri Oct  7 15:18:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 15:18:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 15:18:58 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 15:18:58 2011] Source does appear to be extended
[Fri Oct  7 15:18:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 15:19:49 2011] Not overwriting source region fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.reg
[Fri Oct  7 15:19:49 2011] Extracting stamp from image fullrun_ccd6_acisf06847_pi14-548_cl_sm2.00.img.gz, (0, 623) - (185, 817)
[Fri Oct  7 15:19:49 2011] Writing fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6.gif
[Fri Oct  7 15:19:59 2011] ../../acisf06847/products/events/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.evt and ../../acisf06847/products/events/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct  7 15:19:59 2011] Size of ../../acisf06847/products/events/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.evt.gz[events] = 69 counts
[Fri Oct  7 15:19:59 2011] Mean chipx,y = (703.51, 73.16)
[Fri Oct  7 15:19:59 2011] Mean tdetx,y = (3578.51, 1775.16)
[Fri Oct  7 15:19:59 2011] chipx,y range = (678.00-729.00, 47.00-95.00)
[Fri Oct  7 15:19:59 2011] Size of ../../acisf06847/products/events/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 72 counts
[Fri Oct  7 15:19:59 2011] ../../acisf06847/products/images/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.img and ../../acisf06847/products/images/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct  7 15:19:59 2011] ../../acisf06847/products/spectra/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.pi and ../../acisf06847/products/spectra/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct  7 15:19:59 2011] Not generating rmf since there are only 65 counts
[Fri Oct  7 15:20:02 2011] ../../acisf06847/products/lightcurves/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.lc and ../../acisf06847/products/lightcurves/fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct  7 15:20:25 2011] 194.185
[Fri Oct  7 15:21:26 2011] Updating aperture counts using extracted products
[Fri Oct  7 15:21:26 2011] Error reading totcts from fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct  7 15:21:26 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 15:21:26 2011] Using photon index=1.80, rate=0.00222, arf fullrun_ccd6_acisf06847_pi14-548_pass1_cl_src6.arf
[Fri Oct  7 15:21:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 15:21:26 2011] Updating source flux to 2.6e-14
[Fri Oct  7 15:21:46 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting