[Sat Oct  8 22:03:24 2011] Detection parameters:
  Position = (602.8, 448.2) = 18 41 24.06 -4 57 4.2
  Extent = 1.0" x 0.5", rotation angle = 155 degrees
  Source counts = 15.3 +/- 5.7
  Background counts = 17.7
  Rate = 0.0006 +/- 0.0002

[Sat Oct  8 22:03:26 2011] Off-axis axis estimate = 1.95'
[Sat Oct  8 22:04:33 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 22:04:33 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct  8 22:04:33 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.210
[Sat Oct  8 22:04:33 2011] Giving source the simple spatial ID 72 for pass 0, mean size = 0.42"
[Sat Oct  8 22:04:37 2011] fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72.ximg exists
[Sat Oct  8 22:04:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72.csv
[Sat Oct  8 22:04:37 2011] fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72_1.ximg exists
[Sat Oct  8 22:04:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72.csv
[Sat Oct  8 22:04:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06732_pi14-548_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 22:04:42 2011] fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72.ximg exists
[Sat Oct  8 22:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72.csv
[Sat Oct  8 22:04:42 2011] fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72_1.ximg exists
[Sat Oct  8 22:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72.csv
[Sat Oct  8 22:04:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06732_pi14-548_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 22:05:00 2011] Spatial fit model total counts = 24.430700, observed total counts = 136.000000
[Sat Oct  8 22:05:00 2011] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Oct  8 22:05:00 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 22:05:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 22:05:00 2011] Assessing source extent using major
[Sat Oct  8 22:05:00 2011] Source does appear to be extended
[Sat Oct  8 22:05:00 2011] Computing asymmetry using major and minor axis, asym = 1.99
[Sat Oct  8 22:05:00 2011] Source is asymmetric
[Sat Oct  8 22:05:00 2011] Deleting source due to low Poisson probability 0.9