[Tue Apr 10 19:57:21 2012] Detection parameters:
  Position = (435.0, 630.0) = 9 18 36.03 41 55 22.8
  Extent = 8.1" x 6.2", rotation angle = 91 degrees
  Source counts = 315.6 +/- 22.9
  Background counts = 210.4
  Rate = 0.006 +/- 0.0004

[Tue Apr 10 19:57:22 2012] Off-axis axis estimate = 13.96'
[Tue Apr 10 19:58:13 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:58:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 19:58:13 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Tue Apr 10 19:58:13 2012] source mask rpix=17.8, npix_max = 1345, mask sum = 1296, frac = 0.963
[Tue Apr 10 19:58:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.78"
[Tue Apr 10 19:58:13 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 19:58:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 19:58:13 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 19:58:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 19:58:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06729_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 19:58:13 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 19:58:13 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 19:58:13 2012] Fit fullrun_ccd3_acisf06729_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 19:58:21 2012] Spatial fit model total counts = 728.458000, observed total counts = 731.000000
[Tue Apr 10 19:58:21 2012] Offset between fit and detection position for source 1 = 3.381493 pixels
[Tue Apr 10 19:58:21 2012] 728.272000 total counts/ 318.907000 bgd. counts: snr = 22.923382
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.381493 pixels
  Position = (435.8, 633.3) = 9 18 36.02 41 55 24.2
  Extent = 8.2 (7.5-9.0)", rotation angle = 0
  Source counts = 409.4 +/- 27.0
  Background counts = 318.9
  Rate = 0.008 +/- 0.0005
[Tue Apr 10 19:58:21 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:58:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:58:21 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 19:58:21 2012] Source does appear to be extended
[Tue Apr 10 19:58:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 19:58:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 19:58:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 19:58:43 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Tue Apr 10 19:58:43 2012] source mask rpix=16.7, npix_max = 1180, mask sum = 1156, frac = 0.979
[Tue Apr 10 19:58:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.21"
[Tue Apr 10 19:58:43 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 19:58:43 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 19:58:43 2012] Fit fullrun_ccd3_acisf06729_pi14-548_cl_pass1_src1 appears to have run properly
[Tue Apr 10 19:58:43 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 19:58:43 2012] fullrun_ccd3_acisf06729_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 19:58:43 2012] Fit fullrun_ccd3_acisf06729_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 19:58:51 2012] Spatial fit model total counts = 686.525000, observed total counts = 684.000000
[Tue Apr 10 19:58:51 2012] Offset between fit and detection position for source 1 = 0.050831 pixels
[Tue Apr 10 19:58:51 2012] 686.613000 total counts/ 327.635000 bgd. counts: snr = 19.832282
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050831 pixels
  Position = (435.8, 633.3) = 9 18 36.02 41 55 24.2
  Extent = 6.7 (6.4-13.4)" x 6.7 (6.4-13.4)", rotation angle = 0 (54-0) degrees
  Source counts = 359.0 +/- 26.2
  Background counts = 327.6
  Rate = 0.007 +/- 0.0005
[Tue Apr 10 19:58:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 19:58:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 19:58:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 19:58:51 2012] Source does appear to be extended
[Tue Apr 10 19:58:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.48
[Tue Apr 10 19:59:26 2012] Not overwriting source region fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 19:59:26 2012] Extracting stamp from image fullrun_ccd3_acisf06729_pi14-548_cl_sm2.00.img.gz, (130, 327) - (742, 939)
[Tue Apr 10 19:59:26 2012] Writing fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 19:59:26 2012] ../../acisf06729/products/events/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.evt and ../../acisf06729/products/events/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 19:59:26 2012] Size of ../../acisf06729/products/events/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.evt.gz[events] = 552 counts
[Tue Apr 10 19:59:26 2012] Mean chipx,y = (712.63, 360.36)
[Tue Apr 10 19:59:26 2012] Mean tdetx,y = (4771.64, 3773.63)
[Tue Apr 10 19:59:26 2012] chipx,y range = (648.00-780.00, 298.00-423.00)
[Tue Apr 10 19:59:26 2012] Size of ../../acisf06729/products/events/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1602 counts
[Tue Apr 10 19:59:26 2012] ../../acisf06729/products/images/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.img and ../../acisf06729/products/images/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 19:59:26 2012] ../../acisf06729/products/spectra/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.pi and ../../acisf06729/products/spectra/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 19:59:29 2012] ../../acisf06729/products/lightcurves/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.lc and ../../acisf06729/products/lightcurves/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 19:59:40 2012] Keeping rmf generated by specextract
[Tue Apr 10 19:59:40 2012] 147.688
[Tue Apr 10 20:03:03 2012] Updating aperture counts using extracted products
[Tue Apr 10 20:03:03 2012] Error reading totcts from fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Apr 10 20:03:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 20:03:03 2012] Using photon index=1.80, rate=0.00659, arf fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 20:03:03 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 20:03:03 2012] Updating source flux to 9.7e-14
[Tue Apr 10 20:03:12 2012] Reading fit data from acisf06729/analysis//spectral/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_pl.csv
[Tue Apr 10 20:03:12 2012] Spectral fit parameter nH value = 7.36534e+21
[Tue Apr 10 20:03:12 2012] Spectral fit parameter PhoIndex value = 1.89535
[Tue Apr 10 20:03:12 2012] Failed to get F(0.3-8.0) from acisf06729/analysis//spectral/fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 20:03:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 20:03:12 2012] Using Nh = 7.4e+21, photon index=1.90, rate=0.00659, arf fullrun_ccd3_acisf06729_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 20:03:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 20:03:12 2012] Updating source flux to 1.1e-13