[Mon Oct 17 11:50:44 2011] Detection parameters:
  Position = (501.5, 120.9) = 11 12 37.48 -61 4 13.0
  Extent = 0.9" x 0.5", rotation angle = 127 degrees
  Source counts = 66.5 +/- 8.5
  Background counts = 5.5
  Rate = 0.002 +/- 0.0003

[Mon Oct 17 11:50:44 2011] Off-axis axis estimate = 2.92'
[Mon Oct 17 11:51:17 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 11:51:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 11:51:17 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Mon Oct 17 11:51:17 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.104
[Mon Oct 17 11:51:17 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.57"
[Mon Oct 17 11:51:18 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 17 11:51:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 11:51:18 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 17 11:51:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 11:51:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06706_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 11:51:18 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 17 11:51:18 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 17 11:51:18 2011] Fit fullrun_ccd7_acisf06706_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Oct 17 11:51:25 2011] Spatial fit model total counts = 75.484300, observed total counts = 77.000000
[Mon Oct 17 11:51:25 2011] Offset between fit and detection position for source 19 = 0.734928 pixels
[Mon Oct 17 11:51:25 2011] 76.737500 total counts/ 20.800400 bgd. counts: snr = 12.264903
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.734928 pixels
  Position = (502.1, 121.2) = 11 12 37.47 -61 4 13.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 55.9 +/- 8.8
  Background counts = 20.8
  Rate = 0.002 +/- 0.0003
[Mon Oct 17 11:51:25 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 11:51:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 11:51:25 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 11:51:25 2011] Source does appear to be extended
[Mon Oct 17 11:51:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 11:51:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 11:51:40 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Mon Oct 17 11:51:40 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.042
[Mon Oct 17 11:51:40 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.59"
[Mon Oct 17 11:51:41 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct 17 11:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 11:51:41 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct 17 11:51:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 11:51:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06706_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 11:51:41 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct 17 11:51:41 2011] fullrun_ccd7_acisf06706_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct 17 11:51:41 2011] Fit fullrun_ccd7_acisf06706_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Oct 17 11:51:47 2011] Spatial fit model total counts = 77.985000, observed total counts = 78.000000
[Mon Oct 17 11:51:47 2011] Offset between fit and detection position for source 19 = 0.020087 pixels
[Mon Oct 17 11:51:47 2011] 78.338600 total counts/ 20.048300 bgd. counts: snr = 13.018397
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.020087 pixels
  Position = (502.1, 121.2) = 11 12 37.47 -61 4 13.1
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 58.3 +/- 8.9
  Background counts = 20.0
  Rate = 0.002 +/- 0.0003
[Mon Oct 17 11:51:47 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 11:51:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 11:51:47 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 11:51:47 2011] Source does appear to be extended
[Mon Oct 17 11:51:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 11:52:36 2011] Not overwriting source region fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.reg
[Mon Oct 17 11:52:36 2011] Extracting stamp from image fullrun_ccd7_acisf06706_pi14-548_cl_sm2.00.img.gz, (475, 94) - (529, 149)
[Mon Oct 17 11:52:36 2011] Writing fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19.gif
[Mon Oct 17 11:52:40 2011] ../../acisf06706/products/events/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.evt and ../../acisf06706/products/events/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon Oct 17 11:52:40 2011] Size of ../../acisf06706/products/events/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.evt.gz[events] = 66 counts
[Mon Oct 17 11:52:40 2011] Mean chipx,y = (554.50, 445.92)
[Mon Oct 17 11:52:40 2011] Mean tdetx,y = (4471.50, 2147.92)
[Mon Oct 17 11:52:40 2011] chipx,y range = (537.00-572.00, 426.00-463.00)
[Mon Oct 17 11:52:40 2011] Size of ../../acisf06706/products/events/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 43 counts
[Mon Oct 17 11:52:40 2011] ../../acisf06706/products/images/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.img and ../../acisf06706/products/images/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon Oct 17 11:52:40 2011] ../../acisf06706/products/spectra/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.pi and ../../acisf06706/products/spectra/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon Oct 17 11:52:40 2011] Not generating rmf since there are only 58 counts
[Mon Oct 17 11:52:43 2011] ../../acisf06706/products/lightcurves/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.lc and ../../acisf06706/products/lightcurves/fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon Oct 17 11:53:31 2011] 225.561
[Mon Oct 17 11:53:33 2011] Updating aperture counts using extracted products
[Mon Oct 17 11:53:33 2011] Error reading totcts from fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19_src.pi.gz
[Mon Oct 17 11:53:33 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 11:53:33 2011] Using photon index=1.80, rate=0.00175, arf fullrun_ccd7_acisf06706_pi14-548_pass1_cl_src19.arf
[Mon Oct 17 11:53:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 11:53:33 2011] Updating source flux to 2.3e-14
[Mon Oct 17 11:53:46 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting