[Sun Oct  2 05:48:24 2011] Detection parameters:
  Position = (580.6, 1042.6) = 16 0 33.00 -51 35 17.9
  Extent = 0.6" x 0.5", rotation angle = 160 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0003 +/- 8e-05

[Sun Oct  2 05:48:25 2011] Off-axis axis estimate = 4.16'
[Sun Oct  2 05:49:35 2011] Using EEF radius (= 0.88 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 05:49:35 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Sun Oct  2 05:49:35 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.196
[Sun Oct  2 05:49:35 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.88"
[Sun Oct  2 05:49:36 2011] fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct  2 05:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 05:49:36 2011] fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct  2 05:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 05:49:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06687_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:49:36 2011] fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  2 05:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10.csv
[Sun Oct  2 05:49:36 2011] fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  2 05:49:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10.csv
[Sun Oct  2 05:49:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06687_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 05:49:46 2011] Spatial fit model total counts = 18.416500, observed total counts = 21.000000
[Sun Oct  2 05:49:46 2011] Offset between fit and detection position for source 10 = 0.961977 pixels
[Sun Oct  2 05:49:46 2011] 17.311020 total counts/ 3.317320 bgd. counts: snr = 7.683142
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.961977 pixels
  Position = (581.5, 1043.0) = 16 0 32.99 -51 35 17.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 14.0 +/- 4.2
  Background counts = 3.3
  Rate = 0.0003 +/- 8e-05
[Sun Oct  2 05:49:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 05:49:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 05:49:46 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 05:49:46 2011] Source does appear to be extended
[Sun Oct  2 05:49:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 05:49:46 2011] Deleting source due to low Poisson probability 0.9