[Thu Feb 16 23:53:09 2012] Detection parameters:
  Position = (368.4, 959.5) = 18 13 13.43 -17 53 12.8
  Extent = 0.8" x 0.5", rotation angle = 1 degrees
  Source counts = 29.4 +/- 5.6
  Background counts = 1.6
  Rate = 0.001 +/- 0.0002

[Thu Feb 16 23:53:11 2012] Off-axis axis estimate = 3.67'
[Thu Feb 16 23:55:39 2012] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 23:55:39 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Thu Feb 16 23:55:39 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.003
[Thu Feb 16 23:55:39 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.74"
[Fri Feb 17 00:16:39 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9.ximg exists
[Fri Feb 17 00:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9.csv
[Fri Feb 17 00:16:39 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Feb 17 00:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9.csv
[Fri Feb 17 00:16:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06685_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 00:16:39 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Feb 17 00:16:39 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Feb 17 00:16:39 2012] Fit fullrun_ccd0_acisf06685_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Feb 17 01:39:17 2012] Spatial fit model total counts = 30.802900, observed total counts = 31.000000
[Fri Feb 17 01:39:17 2012] Offset between fit and detection position for source 10 = 0.655126 pixels
[Fri Feb 17 01:39:17 2012] 30.881371 total counts/ 0.785171 bgd. counts: snr = 33.964837
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.655126 pixels
  Position = (368.8, 960.0) = 18 13 13.44 -17 53 12.8
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 30.1 +/- 5.6
  Background counts = 0.8
  Rate = 0.001 +/- 0.0002
[Fri Feb 17 01:39:17 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 01:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 01:39:17 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 01:39:17 2012] Source does appear to be extended
[Fri Feb 17 01:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 01:39:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 01:39:48 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Feb 17 01:39:48 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Fri Feb 17 01:39:48 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.79"
[Fri Feb 17 01:59:08 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass1_src9.ximg exists
[Fri Feb 17 01:59:08 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Feb 17 01:59:08 2012] Fit fullrun_ccd0_acisf06685_pi14-548_cl_pass1_src9 appears to have run properly
[Fri Feb 17 01:59:08 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Feb 17 01:59:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Feb 17 01:59:08 2012] fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Feb 17 01:59:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Feb 17 01:59:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06685_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 03:17:37 2012] Spatial fit model total counts = 30.698100, observed total counts = 32.000000
[Fri Feb 17 03:17:37 2012] Offset between fit and detection position for source 10 = 0.134625 pixels
[Fri Feb 17 03:17:37 2012] 31.512305 total counts/ 0.042305 bgd. counts: snr = 153.003334
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.134625 pixels
  Position = (368.9, 960.0) = 18 13 13.43 -17 53 12.8
  Extent = 1.1" x 0.5", rotation angle = 359
  Source counts = 31.5 +/- 5.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Feb 17 03:17:37 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 03:17:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 03:17:37 2012] Assessing source extent using major
[Fri Feb 17 03:17:37 2012] Source does appear to be extended
[Fri Feb 17 03:17:37 2012] Computing asymmetry using major and minor axis, asym = 2.37
[Fri Feb 17 03:17:37 2012] Source is asymmetric
[Fri Feb 17 03:18:08 2012] Writing source region out to fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_src.reg
[Fri Feb 17 03:18:08 2012] Extracting stamp from image fullrun_ccd0_acisf06685_pi14-548_cl_sm2.00.img.gz, (319, 910) - (419, 1010)
[Fri Feb 17 03:18:08 2012] Writing fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10.gif
[Fri Feb 17 03:20:02 2012] Size of ../../acisf06685/products/events/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_src.evt.gz[events] = 31 counts
[Fri Feb 17 03:20:02 2012] Mean chipx,y = (675.90, 953.10)
[Fri Feb 17 03:20:02 2012] Mean tdetx,y = (4014.10, 4456.10)
[Fri Feb 17 03:20:02 2012] chipx,y range = (658.00-692.00, 933.00-965.00)
[Fri Feb 17 03:20:02 2012] Size of ../../acisf06685/products/events/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 47 counts
[Fri Feb 17 03:20:03 2012] Not generating rmf since there are only 31 counts
[Fri Feb 17 03:20:03 2012] arf not found, will run specextract
[Fri Feb 17 03:20:05 2012] ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_bkg.pi not found
[Fri Feb 17 03:20:05 2012] ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10.warf not found
[Fri Feb 17 03:20:05 2012] ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10.wrmf not found
[Fri Feb 17 03:20:05 2012] Removal of ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10.soff failed
[Fri Feb 17 03:20:05 2012] Failed to rename ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_grp.pi to ../../acisf06685/products/spectra/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_src.pi
[Fri Feb 17 03:24:43 2012] No arf file found
[Fri Feb 17 03:38:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 03:38:57 2012] Error reading totcts from fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_src.pi
[Fri Feb 17 03:38:58 2012] No arf file for this source, not re-computing flux
[Fri Feb 17 03:39:03 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 03:39:04 2012] acisf06685/analysis//spectral/fullrun_ccd0_acisf06685_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete