[Sat Sep 24 19:31:35 2011] Detection parameters:
  Position = (523.8, 1087.9) = 11 25 4.37 -59 17 17.4
  Extent = 0.8" x 0.5", rotation angle = 162 degrees
  Source counts = 73.7 +/- 9.1
  Background counts = 9.3
  Rate = 0.002 +/- 0.0002

[Sat Sep 24 19:31:51 2011] Off-axis axis estimate = 3.94'
[Sat Sep 24 19:38:52 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 19:38:52 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Sep 24 19:38:52 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Sat Sep 24 19:38:52 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 0.81"
[Sat Sep 24 19:38:55 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67.ximg exists
[Sat Sep 24 19:38:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67.csv
[Sat Sep 24 19:38:55 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67_1.ximg exists
[Sat Sep 24 19:38:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67.csv
[Sat Sep 24 19:38:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06678_pi14-548_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 19:38:57 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass0_tfrozen_src67.ximg exists
[Sat Sep 24 19:38:57 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass0_tfrozen_src67_1.ximg exists
[Sat Sep 24 19:38:57 2011] Fit fullrun_ccd3_acisf06678_pi14-548_cl_pass0_tfrozen_src67 appears to have run properly
[Sat Sep 24 19:40:02 2011] Spatial fit model total counts = 89.991500, observed total counts = 90.000000
[Sat Sep 24 19:40:02 2011] Offset between fit and detection position for source 42 = 0.659428 pixels
[Sat Sep 24 19:40:02 2011] 90.578100 total counts/ 18.496700 bgd. counts: snr = 16.760080
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.659428 pixels
  Position = (524.2, 1088.4) = 11 25 4.37 -59 17 17.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 72.1 +/- 9.5
  Background counts = 18.5
  Rate = 0.002 +/- 0.0002
[Sat Sep 24 19:40:02 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 19:40:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 19:40:02 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 19:40:02 2011] Source does appear to be extended
[Sat Sep 24 19:40:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:41:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 19:41:16 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Sep 24 19:41:16 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.938
[Sat Sep 24 19:41:16 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 0.63"
[Sat Sep 24 19:41:24 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65.ximg exists
[Sat Sep 24 19:41:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65.csv
[Sat Sep 24 19:41:24 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65_1.ximg exists
[Sat Sep 24 19:41:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65.csv
[Sat Sep 24 19:41:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06678_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 19:41:25 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Sat Sep 24 19:41:26 2011] fullrun_ccd3_acisf06678_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Sat Sep 24 19:41:26 2011] Fit fullrun_ccd3_acisf06678_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Sat Sep 24 19:42:20 2011] Spatial fit model total counts = 87.996900, observed total counts = 88.000000
[Sat Sep 24 19:42:20 2011] Offset between fit and detection position for source 42 = 0.011640 pixels
[Sat Sep 24 19:42:20 2011] 88.555100 total counts/ 15.175600 bgd. counts: snr = 18.836570
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.011640 pixels
  Position = (524.2, 1088.4) = 11 25 4.37 -59 17 17.4
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 73.4 +/- 9.4
  Background counts = 15.2
  Rate = 0.002 +/- 0.0002
[Sat Sep 24 19:42:20 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 19:42:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 19:42:20 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 19:42:20 2011] Source does appear to be extended
[Sat Sep 24 19:42:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 19:55:26 2011] Not overwriting source region fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.reg
[Sat Sep 24 19:55:26 2011] Extracting stamp from image fullrun_ccd3_acisf06678_pi14-548_cl_sm2.00.img.gz, (495, 1059) - (554, 1118)
[Sat Sep 24 19:55:26 2011] Writing fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42.gif
[Sat Sep 24 19:58:56 2011] ../../acisf06678/products/events/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.evt and ../../acisf06678/products/events/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Sat Sep 24 19:58:56 2011] Size of ../../acisf06678/products/events/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.evt.gz[events] = 78 counts
[Sat Sep 24 19:58:56 2011] Mean chipx,y = (949.79, 535.31)
[Sat Sep 24 19:58:56 2011] Mean tdetx,y = (4596.69, 4010.79)
[Sat Sep 24 19:58:56 2011] chipx,y range = (931.00-967.00, 516.00-553.00)
[Sat Sep 24 19:58:56 2011] Size of ../../acisf06678/products/events/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 100 counts
[Sat Sep 24 19:58:56 2011] ../../acisf06678/products/images/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.img and ../../acisf06678/products/images/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Sat Sep 24 19:58:56 2011] ../../acisf06678/products/spectra/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.pi and ../../acisf06678/products/spectra/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Sat Sep 24 19:58:56 2011] Not generating rmf since there are only 73 counts
[Sat Sep 24 19:58:59 2011] ../../acisf06678/products/lightcurves/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.lc and ../../acisf06678/products/lightcurves/fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Sat Sep 24 20:00:12 2011] 192.444
[Sat Sep 24 20:00:33 2011] Updating aperture counts using extracted products
[Sat Sep 24 20:00:33 2011] Error reading totcts from fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42_src.pi.gz
[Sat Sep 24 20:00:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 20:00:34 2011] Using photon index=1.80, rate=0.00166, arf fullrun_ccd3_acisf06678_pi14-548_pass1_cl_src42.arf
[Sat Sep 24 20:00:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 20:00:34 2011] Updating source flux to 2.2e-14
[Sat Sep 24 20:20:21 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting