[Mon Oct 24 13:18:44 2011] Detection parameters:
  Position = (551.2, 414.5) = 17 45 35.53 -29 1 34.3
  Extent = 0.5" x 0.5", rotation angle = 66 degrees
  Source counts = 1583.5 +/- 40.9
  Background counts = 91.5
  Rate = 0.3 +/- 0.008

[Mon Oct 24 13:18:44 2011] Off-axis axis estimate = 7.23'
[Mon Oct 24 13:19:20 2011] Using EEF radius (= 2.32 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 13:19:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 13:19:20 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Mon Oct 24 13:19:20 2011] source mask rpix=4.7, npix_max = 109, mask sum = 99, frac = 0.908
[Mon Oct 24 13:19:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.32"
[Mon Oct 24 13:19:21 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 13:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 13:19:21 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 13:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 13:19:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06603_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 13:19:21 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 13:19:21 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 13:19:21 2011] Fit fullrun_ccd1_acisf06603_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 13:19:28 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 26.501401 pixels away
[Mon Oct 24 13:19:28 2011] Spatial fit model total counts = 4896.550000, observed total counts = 4907.000000
[Mon Oct 24 13:19:28 2011] Offset between fit and detection position for source 10 = 2.063717 pixels
[Mon Oct 24 13:19:28 2011] Warning, changing simple spatial fit ID from 1 to 2
[Mon Oct 24 13:19:28 2011] 4902.310400 total counts/ 19.050400 bgd. counts: snr = 1118.813759
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.063717 pixels
  Position = (551.3, 416.6) = 17 45 35.55 -29 1 33.6
  Extent = 2.5 (2.5-2.6)", rotation angle = 0
  Source counts = 4883.3 +/- 70.0
  Background counts = 19.1
  Rate = 1 +/- 0.01
[Mon Oct 24 13:19:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 13:19:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 13:19:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 13:19:28 2011] Source does appear to be extended
[Mon Oct 24 13:19:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 13:19:28 2011] Source is confused with source 1
[Mon Oct 24 13:19:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 13:19:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 13:19:43 2011] Initial guess for spatial extent in simple fitting = 2.54"
[Mon Oct 24 13:19:43 2011] source mask rpix=5.2, npix_max = 127, mask sum = 107, frac = 0.837
[Mon Oct 24 13:19:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.54"
[Mon Oct 24 13:19:43 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 13:19:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 13:19:43 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 13:19:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 13:19:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06603_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 13:19:43 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 13:19:43 2011] fullrun_ccd1_acisf06603_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 13:19:43 2011] Fit fullrun_ccd1_acisf06603_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 13:19:49 2011] Warning, spatial fit 1 centroid is now closest to src. 1
[Mon Oct 24 13:19:49 2011] Spatial fit model total counts = 4884.000000, observed total counts = 4907.000000
[Mon Oct 24 13:19:49 2011] Offset between fit and detection position for source 10 = 4.140201 pixels
[Mon Oct 24 13:19:49 2011] Warning, changing simple spatial fit ID from 1 to 2
[Mon Oct 24 13:19:49 2011] 501.846000 total counts/ 103.950000 bgd. counts: snr = 39.026295
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.140201 pixels
  Position = (547.3, 415.4) = 17 45 35.69 -29 1 34.1
  Extent = 1.2 (0.6-1.8)", rotation angle = 0
  Source counts = 397.9 +/- 22.4
  Background counts = 104.0
  Rate = 0.08 +/- 0.005
[Mon Oct 24 13:19:49 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 13:19:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 13:19:49 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 13:19:49 2011] Source does appear to be extended
[Mon Oct 24 13:19:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 13:20:20 2011] Not overwriting source region fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.reg
[Mon Oct 24 13:20:20 2011] Extracting stamp from image fullrun_ccd1_acisf06603_pi14-548_cl_sm2.00.img.gz, (493, 361) - (601, 469)
[Mon Oct 24 13:20:20 2011] Writing fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10.gif
[Mon Oct 24 13:20:21 2011] ../../acisf06603/products/events/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.evt and ../../acisf06603/products/events/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Oct 24 13:20:21 2011] Size of ../../acisf06603/products/events/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.evt.gz[events] = 4895 counts
[Mon Oct 24 13:20:21 2011] Mean chipx,y = (522.92, 379.45)
[Mon Oct 24 13:20:21 2011] Mean tdetx,y = (4752.55, 4629.92)
[Mon Oct 24 13:20:21 2011] chipx,y range = (498.00-549.00, 354.00-405.00)
[Mon Oct 24 13:20:21 2011] Size of ../../acisf06603/products/events/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 729 counts
[Mon Oct 24 13:20:21 2011] ../../acisf06603/products/images/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.img and ../../acisf06603/products/images/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Oct 24 13:20:21 2011] ../../acisf06603/products/spectra/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.pi and ../../acisf06603/products/spectra/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Oct 24 13:20:24 2011] ../../acisf06603/products/lightcurves/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.lc and ../../acisf06603/products/lightcurves/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Oct 24 13:20:40 2011] Keeping rmf generated by specextract
[Mon Oct 24 13:20:40 2011] 168.848
[Mon Oct 24 13:21:31 2011] Updating aperture counts using extracted products
[Mon Oct 24 13:21:31 2011] Error reading totcts from fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Oct 24 13:21:31 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 13:21:31 2011] Using photon index=1.80, rate=0.0814, arf fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10.arf
[Mon Oct 24 13:21:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 13:21:31 2011] Updating source flux to 1.5e-12
[Mon Oct 24 13:21:34 2011] Flag c found in src. 10 procflags, skipping spectral fitting
[Mon Oct 24 13:21:43 2011] Reading fit data from acisf06603/analysis//spectral/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_pl.csv
[Mon Oct 24 13:21:43 2011] Spectral fit parameter nH value = 2.19103e+23
[Mon Oct 24 13:21:43 2011] Spectral fit parameter PhoIndex value = 1.95504
[Mon Oct 24 13:21:43 2011] Failed to get F(0.3-8.0) from acisf06603/analysis//spectral/fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 13:21:43 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 13:21:43 2011] Using Nh = 2.2e+23, photon index=1.96, rate=0.0814, arf fullrun_ccd1_acisf06603_pi14-548_pass1_cl_src10.arf
[Mon Oct 24 13:21:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 13:21:43 2011] Updating source flux to 3.4e-12