[Sat Oct  1 01:59:51 2011] Detection parameters:
  Position = (585.3, 518.6) = 2 40 24.49 61 17 21.0
  Extent = 0.6" x 0.5", rotation angle = 162 degrees
  Source counts = 30.9 +/- 5.7
  Background counts = 1.1
  Rate = 0.0006 +/- 0.0001

[Sat Oct  1 01:59:53 2011] Off-axis axis estimate = 3.94'
[Sat Oct  1 02:01:05 2011] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 02:01:05 2011] Initial guess for spatial extent in simple fitting = 0.81"
[Sat Oct  1 02:01:05 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.081
[Sat Oct  1 02:01:05 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.81"
[Sat Oct  1 02:01:06 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct  1 02:01:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 02:01:06 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct  1 02:01:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 02:01:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06585_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 02:01:07 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct  1 02:01:07 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct  1 02:01:07 2011] Fit fullrun_ccd3_acisf06585_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct  1 02:01:25 2011] Spatial fit model total counts = 33.999900, observed total counts = 34.000000
[Sat Oct  1 02:01:25 2011] Offset between fit and detection position for source 22 = 0.701381 pixels
[Sat Oct  1 02:01:25 2011] 33.935910 total counts/ 4.796210 bgd. counts: snr = 13.305647
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.701381 pixels
  Position = (585.7, 519.3) = 2 40 24.50 61 17 21.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 29.1 +/- 5.8
  Background counts = 4.8
  Rate = 0.0006 +/- 0.0001
[Sat Oct  1 02:01:25 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 02:01:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 02:01:25 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 02:01:25 2011] Source does appear to be extended
[Sat Oct  1 02:01:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 02:01:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 02:01:52 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Oct  1 02:01:52 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.783
[Sat Oct  1 02:01:52 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.59"
[Sat Oct  1 02:01:52 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct  1 02:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 02:01:52 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct  1 02:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 02:01:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06585_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 02:01:53 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct  1 02:01:53 2011] fullrun_ccd3_acisf06585_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct  1 02:01:53 2011] Fit fullrun_ccd3_acisf06585_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct  1 02:02:10 2011] Spatial fit model total counts = 33.804600, observed total counts = 34.000000
[Sat Oct  1 02:02:10 2011] Offset between fit and detection position for source 22 = 0.008016 pixels
[Sat Oct  1 02:02:10 2011] 33.401200 total counts/ 4.235600 bgd. counts: snr = 14.171422
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.008016 pixels
  Position = (585.7, 519.3) = 2 40 24.50 61 17 21.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 29.2 +/- 5.8
  Background counts = 4.2
  Rate = 0.0006 +/- 0.0001
[Sat Oct  1 02:02:10 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 02:02:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 02:02:10 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 02:02:10 2011] Source does appear to be extended
[Sat Oct  1 02:02:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 02:06:21 2011] Not overwriting source region fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.reg
[Sat Oct  1 02:06:21 2011] Extracting stamp from image fullrun_ccd3_acisf06585_pi14-548_cl_sm2.00.img.gz, (559, 492) - (613, 546)
[Sat Oct  1 02:06:21 2011] Writing fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22.gif
[Sat Oct  1 02:06:53 2011] ../../acisf06585/products/events/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.evt and ../../acisf06585/products/events/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Oct  1 02:06:53 2011] Size of ../../acisf06585/products/events/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.evt.gz[events] = 31 counts
[Sat Oct  1 02:06:53 2011] Mean chipx,y = (603.13, 680.03)
[Sat Oct  1 02:06:53 2011] Mean tdetx,y = (4451.97, 3664.13)
[Sat Oct  1 02:06:53 2011] chipx,y range = (588.00-623.00, 665.00-698.00)
[Sat Oct  1 02:06:53 2011] Size of ../../acisf06585/products/events/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 5 counts
[Sat Oct  1 02:06:53 2011] ../../acisf06585/products/images/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.img and ../../acisf06585/products/images/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Oct  1 02:06:53 2011] ../../acisf06585/products/spectra/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.pi and ../../acisf06585/products/spectra/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Oct  1 02:06:53 2011] Not generating rmf since there are only 29 counts
[Sat Oct  1 02:06:56 2011] ../../acisf06585/products/lightcurves/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.lc and ../../acisf06585/products/lightcurves/fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Oct  1 02:08:08 2011] 190.726
[Sat Oct  1 02:08:23 2011] Updating aperture counts using extracted products
[Sat Oct  1 02:08:23 2011] Error reading totcts from fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22_src.pi.gz
[Sat Oct  1 02:08:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 02:08:23 2011] Using photon index=1.80, rate=0.000594, arf fullrun_ccd3_acisf06585_pi14-548_pass1_cl_src22.arf
[Sat Oct  1 02:08:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 02:08:23 2011] Updating source flux to 8.4e-15
[Sat Oct  1 02:08:33 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting