[Thu Oct 20 21:10:54 2011] Detection parameters:
  Position = (463.3, 172.6) = 20 5 5.20 32 21 21.0
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 1032.2 +/- 32.5
  Background counts = 22.8
  Rate = 0.01 +/- 0.0003

[Thu Oct 20 21:10:55 2011] Off-axis axis estimate = 2.04'
[Thu Oct 20 21:11:14 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 21:11:14 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Oct 20 21:11:14 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.176
[Thu Oct 20 21:11:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Thu Oct 20 21:11:14 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 21:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 21:11:14 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 21:11:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 21:11:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06563_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 21:11:14 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 21:11:14 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 21:11:14 2011] Fit fullrun_ccd7_acisf06563_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 21:11:18 2011] Spatial fit model total counts = 1059.000000, observed total counts = 1059.000000
[Thu Oct 20 21:11:18 2011] Offset between fit and detection position for source 1 = 0.712906 pixels
[Thu Oct 20 21:11:18 2011] 1060.401300 total counts/ 63.111300 bgd. counts: snr = 125.535889
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.712906 pixels
  Position = (463.8, 173.2) = 20 5 5.21 32 21 21.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 997.3 +/- 32.6
  Background counts = 63.1
  Rate = 0.01 +/- 0.0003
[Thu Oct 20 21:11:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 21:11:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 21:11:18 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 21:11:18 2011] Source does appear to be extended
[Thu Oct 20 21:11:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 21:11:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 21:11:23 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Oct 20 21:11:23 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.025
[Thu Oct 20 21:11:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.48"
[Thu Oct 20 21:11:24 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 21:11:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 21:11:24 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 21:11:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 21:11:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06563_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 21:11:24 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 21:11:24 2011] fullrun_ccd7_acisf06563_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 21:11:24 2011] Fit fullrun_ccd7_acisf06563_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 21:11:28 2011] Spatial fit model total counts = 1058.950000, observed total counts = 1059.000000
[Thu Oct 20 21:11:28 2011] Offset between fit and detection position for source 1 = 0.000430 pixels
[Thu Oct 20 21:11:28 2011] 1060.350600 total counts/ 63.133600 bgd. counts: snr = 125.504528
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000430 pixels
  Position = (463.8, 173.2) = 20 5 5.21 32 21 21.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 997.2 +/- 32.6
  Background counts = 63.1
  Rate = 0.01 +/- 0.0003
[Thu Oct 20 21:11:28 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 21:11:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 21:11:28 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 21:11:28 2011] Source does appear to be extended
[Thu Oct 20 21:11:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 21:11:33 2011] Not overwriting source region fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 21:11:33 2011] Extracting stamp from image fullrun_ccd7_acisf06563_pi14-548_cl_sm2.00.img.gz, (442, 151) - (486, 195)
[Thu Oct 20 21:11:33 2011] Writing fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 21:11:34 2011] ../../acisf06563/products/events/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.evt and ../../acisf06563/products/events/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 21:11:34 2011] Size of ../../acisf06563/products/events/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1013 counts
[Thu Oct 20 21:11:34 2011] Mean chipx,y = (438.91, 516.49)
[Thu Oct 20 21:11:34 2011] Mean tdetx,y = (4355.91, 2218.49)
[Thu Oct 20 21:11:34 2011] chipx,y range = (420.00-459.00, 497.00-535.00)
[Thu Oct 20 21:11:34 2011] Size of ../../acisf06563/products/events/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 73 counts
[Thu Oct 20 21:11:34 2011] ../../acisf06563/products/images/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.img and ../../acisf06563/products/images/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 21:11:34 2011] ../../acisf06563/products/spectra/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.pi and ../../acisf06563/products/spectra/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 21:11:37 2011] ../../acisf06563/products/lightcurves/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.lc and ../../acisf06563/products/lightcurves/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 21:12:26 2011] Keeping rmf generated by specextract
[Thu Oct 20 21:12:26 2011] 233.151
[Thu Oct 20 21:12:27 2011] Updating aperture counts using extracted products
[Thu Oct 20 21:12:27 2011] Error reading totcts from fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 21:12:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 21:12:27 2011] Using photon index=1.80, rate=0.0107, arf fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 21:12:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 21:12:27 2011] Updating source flux to 1.3e-13
[Thu Oct 20 21:12:36 2011] Reading fit data from acisf06563/analysis//spectral/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 20 21:12:36 2011] Spectral fit parameter nH value = 1.43033e+21
[Thu Oct 20 21:12:36 2011] Spectral fit parameter PhoIndex value = 1.91087
[Thu Oct 20 21:12:36 2011] Failed to get F(0.3-8.0) from acisf06563/analysis//spectral/fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 21:12:36 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 21:12:36 2011] Using Nh = 1.4e+21, photon index=1.91, rate=0.0107, arf fullrun_ccd7_acisf06563_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 21:12:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 21:12:36 2011] Updating source flux to 7.8e-14