[Fri Oct 28 19:31:59 2011] Detection parameters:
  Position = (396.2, 754.6) = 3 30 18.02 43 56 2.4
  Extent = 2.8" x 2.3", rotation angle = 149 degrees
  Source counts = 150.5 +/- 14.4
  Background counts = 55.5
  Rate = 0.002 +/- 0.0002

[Fri Oct 28 19:31:59 2011] Off-axis axis estimate = 10.30'
[Fri Oct 28 19:33:16 2011] Using EEF radius (= 4.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:33:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 19:33:16 2011] Initial guess for spatial extent in simple fitting = 4.70"
[Fri Oct 28 19:33:16 2011] source mask rpix=9.6, npix_max = 404, mask sum = 400, frac = 0.989
[Fri Oct 28 19:33:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.70"
[Fri Oct 28 19:33:16 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 19:33:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 19:33:16 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 19:33:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 19:33:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00650_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:33:16 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 19:33:16 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 19:33:16 2011] Fit fullrun_ccd3_acisf00650_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 19:33:29 2011] Spatial fit model total counts = 312.046000, observed total counts = 307.000000
[Fri Oct 28 19:33:29 2011] Offset between fit and detection position for source 5 = 1.410577 pixels
[Fri Oct 28 19:33:29 2011] 311.999000 total counts/ 141.582000 bgd. counts: snr = 14.322172
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.410577 pixels
  Position = (396.9, 755.9) = 3 30 18.02 43 56 2.8
  Extent = 4.2 (3.6-4.8)", rotation angle = 0
  Source counts = 170.4 +/- 17.7
  Background counts = 141.6
  Rate = 0.002 +/- 0.0002
[Fri Oct 28 19:33:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:33:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:33:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 19:33:29 2011] Source does appear to be extended
[Fri Oct 28 19:33:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 19:33:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 19:33:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 19:33:59 2011] Initial guess for spatial extent in simple fitting = 4.18"
[Fri Oct 28 19:33:59 2011] source mask rpix=8.5, npix_max = 323, mask sum = 324, frac = 1.002
[Fri Oct 28 19:33:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.18"
[Fri Oct 28 19:33:59 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 19:33:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 19:33:59 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 19:33:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 19:33:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00650_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 19:33:59 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 19:33:59 2011] fullrun_ccd3_acisf00650_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 19:34:00 2011] Fit fullrun_ccd3_acisf00650_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 19:34:10 2011] Spatial fit model total counts = 282.742000, observed total counts = 281.000000
[Fri Oct 28 19:34:10 2011] Offset between fit and detection position for source 5 = 0.449058 pixels
[Fri Oct 28 19:34:10 2011] 282.526000 total counts/ 118.815000 bgd. counts: snr = 15.019042
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.449058 pixels
  Position = (397.2, 755.6) = 3 30 18.00 43 56 2.6
  Extent = 4.1 (3.5-4.7)", rotation angle = 0
  Source counts = 163.7 +/- 16.8
  Background counts = 118.8
  Rate = 0.002 +/- 0.0002
[Fri Oct 28 19:34:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 19:34:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 19:34:10 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 19:34:10 2011] Source does appear to be extended
[Fri Oct 28 19:34:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 19:34:58 2011] Not overwriting source region fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 19:34:58 2011] Extracting stamp from image fullrun_ccd3_acisf00650_pi14-548_cl_sm2.00.img.gz, (210, 568) - (585, 943)
[Fri Oct 28 19:34:58 2011] Writing fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 19:34:58 2011] ../../acisf00650/products/events/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.evt and ../../acisf00650/products/events/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 19:34:58 2011] Size of ../../acisf00650/products/events/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.evt.gz[events] = 249 counts
[Fri Oct 28 19:34:58 2011] Mean chipx,y = (274.58, 400.53)
[Fri Oct 28 19:34:58 2011] Mean tdetx,y = (4731.47, 3335.58)
[Fri Oct 28 19:34:58 2011] chipx,y range = (234.00-322.00, 360.00-447.00)
[Fri Oct 28 19:34:58 2011] Size of ../../acisf00650/products/events/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 896 counts
[Fri Oct 28 19:34:58 2011] ../../acisf00650/products/images/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.img and ../../acisf00650/products/images/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 19:34:58 2011] ../../acisf00650/products/spectra/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.pi and ../../acisf00650/products/spectra/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 28 19:35:01 2011] ../../acisf00650/products/lightcurves/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.lc and ../../acisf00650/products/lightcurves/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 19:35:09 2011] Keeping rmf generated by specextract
[Fri Oct 28 19:35:09 2011] 170.099
[Fri Oct 28 19:48:31 2011] Updating aperture counts using extracted products
[Fri Oct 28 19:48:31 2011] Error reading totcts from fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 19:48:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 19:48:31 2011] Using photon index=1.80, rate=0.00172, arf fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 19:48:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 19:48:31 2011] Updating source flux to 2e-14
[Fri Oct 28 19:48:44 2011] Reading fit data from acisf00650/analysis//spectral/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_pl.csv
[Fri Oct 28 19:48:44 2011] Spectral fit parameter nH value = 1.0683e+22
[Fri Oct 28 19:48:44 2011] Spectral fit parameter PhoIndex value = 1.7887
[Fri Oct 28 19:48:44 2011] Failed to get F(0.3-8.0) from acisf00650/analysis//spectral/fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 19:48:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 19:48:44 2011] Using Nh = 1.1e+22, photon index=1.79, rate=0.00172, arf fullrun_ccd3_acisf00650_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 19:48:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 19:48:44 2011] Updating source flux to 2.9e-14