[Thu Sep 29 07:17:42 2011] Detection parameters:
  Position = (666.0, 1014.2) = 18 21 43.02 -16 12 55.8
  Extent = 0.8" x 0.6", rotation angle = 151 degrees
  Source counts = 13.1 +/- 3.9
  Background counts = 1.9
  Rate = 0.0004 +/- 0.0001

[Thu Sep 29 07:17:43 2011] Off-axis axis estimate = 2.53'
[Thu Sep 29 07:19:22 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:19:22 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Sep 29 07:19:22 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.988
[Thu Sep 29 07:19:22 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.50"
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14.ximg exists
[Thu Sep 29 07:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14.csv
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14_1.ximg exists
[Thu Sep 29 07:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14.csv
[Thu Sep 29 07:19:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Sep 29 07:19:23 2011] Fit fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Sep 29 07:19:41 2011] Spatial fit model total counts = 17.999100, observed total counts = 18.000000
[Thu Sep 29 07:19:41 2011] Offset between fit and detection position for source 23 = 0.599464 pixels
[Thu Sep 29 07:19:41 2011] 17.860250 total counts/ 4.976550 bgd. counts: snr = 5.775325
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.599464 pixels
  Position = (666.0, 1014.8) = 18 21 43.04 -16 12 55.8
  Extent = 0.7 (0.3-1.3)", rotation angle = 0
  Source counts = 12.9 +/- 4.2
  Background counts = 5.0
  Rate = 0.0004 +/- 0.0001
[Thu Sep 29 07:19:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:19:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:19:41 2011] Source does appear to be extended
[Thu Sep 29 07:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:20:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:20:12 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Sep 29 07:20:12 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.060
[Thu Sep 29 07:20:12 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.71"
[Thu Sep 29 07:20:12 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13.ximg exists
[Thu Sep 29 07:20:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 07:20:13 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Sep 29 07:20:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13.csv
[Thu Sep 29 07:20:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:20:13 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Sep 29 07:20:13 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Sep 29 07:20:13 2011] Fit fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Sep 29 07:20:30 2011] Spatial fit model total counts = 18.331600, observed total counts = 18.000000
[Thu Sep 29 07:20:30 2011] Offset between fit and detection position for source 23 = 0.050240 pixels
[Thu Sep 29 07:20:30 2011] 18.706300 total counts/ 6.136600 bgd. counts: snr = 5.074123
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.050240 pixels
  Position = (666.0, 1014.8) = 18 21 43.04 -16 12 55.8
  Extent = 0.7 (0.3-1.3)", rotation angle = 0
  Source counts = 12.6 +/- 4.3
  Background counts = 6.1
  Rate = 0.0004 +/- 0.0001
[Thu Sep 29 07:20:30 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:20:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:20:30 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:20:30 2011] Source does appear to be extended
[Thu Sep 29 07:20:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:27:36 2011] Not overwriting source region fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.reg
[Thu Sep 29 07:27:36 2011] Extracting stamp from image fullrun_ccd2_acisf06422_pi14-548_cl_sm2.00.img.gz, (633, 982) - (698, 1047)
[Thu Sep 29 07:27:36 2011] Writing fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23.gif
[Thu Sep 29 07:28:27 2011] ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.evt and ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu Sep 29 07:28:27 2011] Size of ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.evt.gz[events] = 14 counts
[Thu Sep 29 07:28:27 2011] Mean chipx,y = (370.00, 982.36)
[Thu Sep 29 07:28:27 2011] Mean tdetx,y = (4043.36, 3716.00)
[Thu Sep 29 07:28:27 2011] chipx,y range = (350.00-383.00, 963.00-996.00)
[Thu Sep 29 07:28:27 2011] Size of ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 28 counts
[Thu Sep 29 07:28:27 2011] ../../acisf06422/products/images/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.img and ../../acisf06422/products/images/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu Sep 29 07:28:27 2011] ../../acisf06422/products/spectra/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.pi and ../../acisf06422/products/spectra/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu Sep 29 07:28:27 2011] Not generating rmf since there are only 12 counts
[Thu Sep 29 07:28:32 2011] ../../acisf06422/products/lightcurves/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.lc and ../../acisf06422/products/lightcurves/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu Sep 29 07:29:04 2011] 195.584
[Thu Sep 29 07:34:08 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:34:08 2011] Error reading totcts from fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23_src.pi.gz
[Thu Sep 29 07:34:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:34:08 2011] Using photon index=1.80, rate=0.000368, arf fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src23.arf
[Thu Sep 29 07:34:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 07:34:08 2011] Updating source flux to 5.5e-15
[Thu Sep 29 07:34:22 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting