[Thu Sep 29 07:17:42 2011] Detection parameters:
  Position = (671.0, 890.1) = 18 21 42.85 -16 13 56.9
  Extent = 0.8" x 0.5", rotation angle = 131 degrees
  Source counts = 16.0 +/- 4.2
  Background counts = 2.0
  Rate = 0.0005 +/- 0.0001

[Thu Sep 29 07:17:43 2011] Off-axis axis estimate = 2.96'
[Thu Sep 29 07:19:22 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:19:22 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Sep 29 07:19:22 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.448
[Thu Sep 29 07:19:22 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.57"
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11.ximg exists
[Thu Sep 29 07:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Sep 29 07:19:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11.csv
[Thu Sep 29 07:19:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06422_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Sep 29 07:19:23 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Sep 29 07:19:23 2011] Fit fullrun_ccd2_acisf06422_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Sep 29 07:19:41 2011] Spatial fit model total counts = 22.694100, observed total counts = 23.000000
[Thu Sep 29 07:19:41 2011] Offset between fit and detection position for source 11 = 1.056617 pixels
[Thu Sep 29 07:19:41 2011] 23.410100 total counts/ 10.865800 bgd. counts: snr = 3.805534
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.056617 pixels
  Position = (671.8, 890.7) = 18 21 42.84 -16 13 56.9
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 12.5 +/- 4.8
  Background counts = 10.9
  Rate = 0.0004 +/- 0.0001
[Thu Sep 29 07:19:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:19:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:19:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:19:41 2011] Source does appear to be extended
[Thu Sep 29 07:19:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:20:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:20:12 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Sep 29 07:20:12 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.033
[Thu Sep 29 07:20:12 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.48"
[Thu Sep 29 07:20:12 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11.ximg exists
[Thu Sep 29 07:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 07:20:12 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Sep 29 07:20:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11.csv
[Thu Sep 29 07:20:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06422_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:20:13 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Sep 29 07:20:13 2011] fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Sep 29 07:20:13 2011] Fit fullrun_ccd2_acisf06422_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Sep 29 07:20:30 2011] Spatial fit model total counts = 22.713300, observed total counts = 23.000000
[Thu Sep 29 07:20:30 2011] Offset between fit and detection position for source 11 = 0.004837 pixels
[Thu Sep 29 07:20:30 2011] 23.428100 total counts/ 10.828800 bgd. counts: snr = 3.828743
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.004837 pixels
  Position = (671.8, 890.7) = 18 21 42.84 -16 13 56.9
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 12.6 +/- 4.8
  Background counts = 10.8
  Rate = 0.0004 +/- 0.0001
[Thu Sep 29 07:20:30 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:20:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:20:30 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:20:30 2011] Source does appear to be extended
[Thu Sep 29 07:20:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:27:36 2011] Not overwriting source region fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.reg
[Thu Sep 29 07:27:36 2011] Extracting stamp from image fullrun_ccd2_acisf06422_pi14-548_cl_sm2.00.img.gz, (650, 869) - (694, 913)
[Thu Sep 29 07:27:36 2011] Writing fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11.gif
[Thu Sep 29 07:28:17 2011] ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.evt and ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Sep 29 07:28:17 2011] Size of ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.evt.gz[events] = 15 counts
[Thu Sep 29 07:28:17 2011] Mean chipx,y = (367.73, 857.53)
[Thu Sep 29 07:28:17 2011] Mean tdetx,y = (3918.53, 3718.27)
[Thu Sep 29 07:28:17 2011] chipx,y range = (348.00-384.00, 838.00-872.00)
[Thu Sep 29 07:28:17 2011] Size of ../../acisf06422/products/events/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 12 counts
[Thu Sep 29 07:28:17 2011] ../../acisf06422/products/images/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.img and ../../acisf06422/products/images/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Sep 29 07:28:17 2011] ../../acisf06422/products/spectra/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.pi and ../../acisf06422/products/spectra/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Sep 29 07:28:17 2011] Not generating rmf since there are only 12 counts
[Thu Sep 29 07:28:22 2011] ../../acisf06422/products/lightcurves/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.lc and ../../acisf06422/products/lightcurves/fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Sep 29 07:29:04 2011] 194.864
[Thu Sep 29 07:34:08 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:34:08 2011] Error reading totcts from fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Sep 29 07:34:08 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:34:08 2011] Using photon index=1.80, rate=0.000369, arf fullrun_ccd2_acisf06422_pi14-548_pass1_cl_src11.arf
[Thu Sep 29 07:34:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 07:34:08 2011] Updating source flux to 5.5e-15
[Thu Sep 29 07:34:22 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting