[Thu Sep 29 07:17:38 2011] Detection parameters:
  Position = (1001.8, 142.6) = 18 20 57.64 -16 11 8.7
  Extent = 3.4" x 2.7", rotation angle = 4 degrees
  Source counts = 205.5 +/- 16.0
  Background counts = 50.5
  Rate = 0.006 +/- 0.0005

[Thu Sep 29 07:17:41 2011] Off-axis axis estimate = 8.55'
[Thu Sep 29 07:19:20 2011] Using EEF radius (= 3.23 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:19:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 07:19:20 2011] Initial guess for spatial extent in simple fitting = 3.23"
[Thu Sep 29 07:19:20 2011] source mask rpix=6.6, npix_max = 199, mask sum = 196, frac = 0.983
[Thu Sep 29 07:19:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.23"
[Thu Sep 29 07:19:21 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 07:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 07:19:21 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 07:19:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 07:19:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06422_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:19:21 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 07:19:21 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 07:19:21 2011] Fit fullrun_ccd1_acisf06422_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 07:19:38 2011] Spatial fit model total counts = 272.043000, observed total counts = 270.000000
[Thu Sep 29 07:19:38 2011] Offset between fit and detection position for source 2 = 1.023704 pixels
[Thu Sep 29 07:19:38 2011] 272.428500 total counts/ 69.395500 bgd. counts: snr = 24.372550
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.023704 pixels
  Position = (1000.9, 143.2) = 18 20 57.68 -16 11 8.7
  Extent = 3.2 (2.8-3.6)", rotation angle = 0
  Source counts = 203.0 +/- 16.5
  Background counts = 69.4
  Rate = 0.006 +/- 0.0005
[Thu Sep 29 07:19:38 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:19:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:19:38 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:19:38 2011] Source does appear to be extended
[Thu Sep 29 07:19:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:20:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 07:20:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 07:20:09 2011] Initial guess for spatial extent in simple fitting = 3.19"
[Thu Sep 29 07:20:09 2011] source mask rpix=6.5, npix_max = 195, mask sum = 196, frac = 1.005
[Thu Sep 29 07:20:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.19"
[Thu Sep 29 07:20:10 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 07:20:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 07:20:10 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 07:20:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 07:20:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06422_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 07:20:11 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 07:20:11 2011] fullrun_ccd1_acisf06422_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 07:20:11 2011] Fit fullrun_ccd1_acisf06422_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 07:20:27 2011] Spatial fit model total counts = 265.000000, observed total counts = 265.000000
[Thu Sep 29 07:20:27 2011] Offset between fit and detection position for source 2 = 0.083199 pixels
[Thu Sep 29 07:20:27 2011] 265.618200 total counts/ 59.277200 bgd. counts: snr = 26.800426
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.083199 pixels
  Position = (1000.9, 143.1) = 18 20 57.68 -16 11 8.7
  Extent = 3.3 (2.9-3.7)", rotation angle = 0
  Source counts = 206.3 +/- 16.3
  Background counts = 59.3
  Rate = 0.006 +/- 0.0005
[Thu Sep 29 07:20:27 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 07:20:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 07:20:27 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 07:20:27 2011] Source does appear to be extended
[Thu Sep 29 07:20:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 07:23:54 2011] Not overwriting source region fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 29 07:23:54 2011] Extracting stamp from image fullrun_ccd1_acisf06422_pi14-548_cl_sm2.00.img.gz, (850, 0) - (1085, 294)
[Thu Sep 29 07:23:54 2011] Writing fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2.gif
[Thu Sep 29 07:23:58 2011] ../../acisf06422/products/events/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.evt and ../../acisf06422/products/events/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 29 07:23:58 2011] Size of ../../acisf06422/products/events/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.evt.gz[events] = 260 counts
[Thu Sep 29 07:23:58 2011] Mean chipx,y = (953.55, 936.20)
[Thu Sep 29 07:23:58 2011] Mean tdetx,y = (4195.80, 5060.55)
[Thu Sep 29 07:23:58 2011] chipx,y range = (916.00-987.00, 894.00-975.00)
[Thu Sep 29 07:23:58 2011] Size of ../../acisf06422/products/events/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 404 counts
[Thu Sep 29 07:23:58 2011] ../../acisf06422/products/images/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.img and ../../acisf06422/products/images/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 29 07:23:58 2011] ../../acisf06422/products/spectra/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.pi and ../../acisf06422/products/spectra/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 29 07:24:06 2011] ../../acisf06422/products/lightcurves/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.lc and ../../acisf06422/products/lightcurves/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 29 07:27:34 2011] Keeping rmf generated by specextract
[Thu Sep 29 07:27:34 2011] 168.536
[Thu Sep 29 07:34:06 2011] Updating aperture counts using extracted products
[Thu Sep 29 07:34:06 2011] Error reading totcts from fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 29 07:34:07 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:34:07 2011] Using photon index=1.80, rate=0.00605, arf fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2.arf
[Thu Sep 29 07:34:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 07:34:07 2011] Updating source flux to 1e-13
[Thu Sep 29 07:34:22 2011] Reading fit data from acisf06422/analysis//spectral/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_pl.csv
[Thu Sep 29 07:34:22 2011] Spectral fit parameter nH value = 4.53702e+21
[Thu Sep 29 07:34:22 2011] Spectral fit parameter PhoIndex value = 2.52911
[Thu Sep 29 07:34:22 2011] Failed to get F(0.3-8.0) from acisf06422/analysis//spectral/fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 07:34:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 07:34:22 2011] Using Nh = 4.5e+21, photon index=2.53, rate=0.00605, arf fullrun_ccd1_acisf06422_pi14-548_pass1_cl_src2.arf
[Thu Sep 29 07:34:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 07:34:22 2011] Updating source flux to 6.5e-14