[Tue Oct 18 05:01:52 2011] Detection parameters:
  Position = (999.2, 1153.7) = 18 20 27.77 -16 11 16.8
  Extent = 0.6" x 0.5", rotation angle = 97 degrees
  Source counts = 27.0 +/- 5.7
  Background counts = 5.0
  Rate = 0.0007 +/- 0.0001

[Tue Oct 18 05:01:56 2011] Off-axis axis estimate = 0.47'
[Tue Oct 18 05:04:34 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 05:04:34 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Tue Oct 18 05:04:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Tue Oct 18 05:04:34 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 0.39"
[Tue Oct 18 05:04:36 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23.ximg exists
[Tue Oct 18 05:04:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23.csv
[Tue Oct 18 05:04:36 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23_1.ximg exists
[Tue Oct 18 05:04:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23.csv
[Tue Oct 18 05:04:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06421_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 05:04:38 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Tue Oct 18 05:04:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23.csv
[Tue Oct 18 05:04:38 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Oct 18 05:04:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23.csv
[Tue Oct 18 05:04:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06421_pi14-548_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 05:05:38 2011] Spatial fit model total counts = 45.658800, observed total counts = 52.000000
[Tue Oct 18 05:05:38 2011] Offset between fit and detection position for source 51 = 0.801773 pixels
[Tue Oct 18 05:05:38 2011] 49.987400 total counts/ 22.219600 bgd. counts: snr = 5.890787
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.801773 pixels
  Position = (999.7, 1154.3) = 18 20 27.77 -16 11 16.7
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 27.8 +/- 7.1
  Background counts = 22.2
  Rate = 0.0007 +/- 0.0002
[Tue Oct 18 05:05:38 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 05:05:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 05:05:38 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 05:05:38 2011] Source does appear to be extended
[Tue Oct 18 05:05:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 05:06:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 05:06:49 2011] Initial guess for spatial extent in simple fitting = 0.34"
[Tue Oct 18 05:06:49 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.040
[Tue Oct 18 05:06:49 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.34"
[Tue Oct 18 05:06:52 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23.ximg exists
[Tue Oct 18 05:06:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23.csv
[Tue Oct 18 05:06:52 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23_1.ximg exists
[Tue Oct 18 05:06:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23.csv
[Tue Oct 18 05:06:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06421_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 05:06:56 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Tue Oct 18 05:06:56 2011] fullrun_ccd2_acisf06421_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Oct 18 05:06:56 2011] Fit fullrun_ccd2_acisf06421_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Oct 18 05:07:53 2011] Spatial fit model total counts = 47.312200, observed total counts = 52.000000
[Tue Oct 18 05:07:53 2011] Offset between fit and detection position for source 51 = 0.014476 pixels
[Tue Oct 18 05:07:53 2011] 52.087200 total counts/ 24.922900 bgd. counts: snr = 5.441257
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.014476 pixels
  Position = (999.7, 1154.4) = 18 20 27.77 -16 11 16.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 27.2 +/- 7.2
  Background counts = 24.9
  Rate = 0.0007 +/- 0.0002
[Tue Oct 18 05:07:53 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 05:07:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 05:07:53 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 05:07:53 2011] Source does appear to be extended
[Tue Oct 18 05:07:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 05:35:47 2011] Not overwriting source region fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.reg
[Tue Oct 18 05:35:47 2011] Extracting stamp from image fullrun_ccd2_acisf06421_pi14-548_cl_sm2.00.img.gz, (983, 1138) - (1016, 1171)
[Tue Oct 18 05:35:47 2011] Writing fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51.gif
[Tue Oct 18 05:38:41 2011] ../../acisf06421/products/events/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.evt and ../../acisf06421/products/events/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_bgd.evt exist, delete to re-create
[Tue Oct 18 05:38:41 2011] Size of ../../acisf06421/products/events/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.evt.gz[events] = 30 counts
[Tue Oct 18 05:38:41 2011] Mean chipx,y = (24.63, 1008.77)
[Tue Oct 18 05:38:41 2011] Mean tdetx,y = (4069.77, 4061.37)
[Tue Oct 18 05:38:41 2011] chipx,y range = (7.00-43.00, 999.00-1022.00)
[Tue Oct 18 05:38:41 2011] Size of ../../acisf06421/products/events/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_bgd.evt.gz[events] = 7 counts
[Tue Oct 18 05:38:41 2011] ../../acisf06421/products/images/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.img and ../../acisf06421/products/images/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_bgd.img exist, delete to re-create
[Tue Oct 18 05:38:41 2011] Not generating rmf since there are only 27 counts
[Tue Oct 18 05:38:41 2011] arf not found, will run specextract
[Tue Oct 18 05:38:42 2011] ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_bkg.pi not found
[Tue Oct 18 05:38:42 2011] ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51.warf not found
[Tue Oct 18 05:38:42 2011] ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51.wrmf not found
[Tue Oct 18 05:38:42 2011] Removal of ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51.soff failed
[Tue Oct 18 05:38:42 2011] Failed to rename ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_grp.pi to ../../acisf06421/products/spectra/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.pi
[Tue Oct 18 05:38:49 2011] ../../acisf06421/products/lightcurves/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.lc and ../../acisf06421/products/lightcurves/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_bgd.lc exist, delete to re-create
[Tue Oct 18 05:46:01 2011] No arf file found
[Tue Oct 18 06:03:17 2011] Updating aperture counts using extracted products
[Tue Oct 18 06:03:17 2011] Error reading totcts from fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_src.pi
[Tue Oct 18 06:03:18 2011] No arf file for this source, not re-computing flux
[Tue Oct 18 06:03:35 2011] Source 51 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 06:03:36 2011] acisf06421/analysis//spectral/fullrun_ccd2_acisf06421_pi14-548_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete