[Wed Oct 26 11:31:05 2011] Detection parameters:
  Position = (884.5, 583.5) = 5 34 58.25 -5 38 25.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 20.1 +/- 4.6
  Background counts = 0.9
  Rate = 0.0007 +/- 0.0002

[Wed Oct 26 11:31:07 2011] Off-axis axis estimate = 5.71'
[Wed Oct 26 11:32:24 2011] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 11:32:24 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Wed Oct 26 11:32:24 2011] source mask rpix=3.0, npix_max = 49, mask sum = 35, frac = 0.702
[Wed Oct 26 11:32:24 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 1.49"
[Wed Oct 26 11:32:26 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33.ximg exists
[Wed Oct 26 11:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33.csv
[Wed Oct 26 11:32:26 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33_1.ximg exists
[Wed Oct 26 11:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33.csv
[Wed Oct 26 11:32:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06416_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 11:32:27 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Wed Oct 26 11:32:27 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Oct 26 11:32:27 2011] Fit fullrun_ccd6_acisf06416_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Oct 26 11:32:47 2011] Spatial fit model total counts = 60.673800, observed total counts = 62.000000
[Wed Oct 26 11:32:47 2011] Offset between fit and detection position for source 25 = 1.005861 pixels
[Wed Oct 26 11:32:47 2011] 61.245910 total counts/ 5.426810 bgd. counts: snr = 23.961308
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.005861 pixels
  Position = (885.4, 583.0) = 5 34 58.24 -5 38 25.7
  Extent = 1.5 (1.2-1.8)", rotation angle = 0
  Source counts = 55.8 +/- 7.8
  Background counts = 5.4
  Rate = 0.002 +/- 0.0003
[Wed Oct 26 11:32:47 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 11:32:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 11:32:47 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 11:32:47 2011] Source does appear to be extended
[Wed Oct 26 11:32:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 11:33:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 11:33:21 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Wed Oct 26 11:33:21 2011] source mask rpix=3.1, npix_max = 52, mask sum = 38, frac = 0.719
[Wed Oct 26 11:33:21 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 1.54"
[Wed Oct 26 11:33:23 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33.ximg exists
[Wed Oct 26 11:33:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33.csv
[Wed Oct 26 11:33:23 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33_1.ximg exists
[Wed Oct 26 11:33:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33.csv
[Wed Oct 26 11:33:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06416_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 11:33:24 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Wed Oct 26 11:33:24 2011] fullrun_ccd6_acisf06416_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Oct 26 11:33:24 2011] Fit fullrun_ccd6_acisf06416_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Oct 26 11:33:45 2011] Spatial fit model total counts = 67.668500, observed total counts = 67.000000
[Wed Oct 26 11:33:45 2011] Offset between fit and detection position for source 25 = 0.386294 pixels
[Wed Oct 26 11:33:45 2011] 68.432500 total counts/ 17.316800 bgd. counts: snr = 12.283454
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.386294 pixels
  Position = (885.2, 583.3) = 5 34 58.24 -5 38 25.5
  Extent = 1.5 (1.1-1.9)", rotation angle = 0
  Source counts = 51.1 +/- 8.3
  Background counts = 17.3
  Rate = 0.002 +/- 0.0003
[Wed Oct 26 11:33:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 11:33:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 11:33:45 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 11:33:45 2011] Source does appear to be extended
[Wed Oct 26 11:33:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 11:36:04 2011] Not overwriting source region fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.reg
[Wed Oct 26 11:36:04 2011] Extracting stamp from image fullrun_ccd6_acisf06416_pi14-548_cl_sm2.00.img.gz, (817, 516) - (953, 651)
[Wed Oct 26 11:36:04 2011] Writing fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25.gif
[Wed Oct 26 11:37:35 2011] ../../acisf06416/products/events/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.evt and ../../acisf06416/products/events/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Wed Oct 26 11:37:35 2011] Size of ../../acisf06416/products/events/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.evt.gz[events] = 69 counts
[Wed Oct 26 11:37:35 2011] Mean chipx,y = (584.71, 724.55)
[Wed Oct 26 11:37:35 2011] Mean tdetx,y = (3459.71, 2426.55)
[Wed Oct 26 11:37:35 2011] chipx,y range = (563.00-606.00, 701.00-745.00)
[Wed Oct 26 11:37:35 2011] Size of ../../acisf06416/products/events/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 57 counts
[Wed Oct 26 11:37:35 2011] ../../acisf06416/products/images/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.img and ../../acisf06416/products/images/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Wed Oct 26 11:37:35 2011] ../../acisf06416/products/spectra/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.pi and ../../acisf06416/products/spectra/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Wed Oct 26 11:37:35 2011] Not generating rmf since there are only 51 counts
[Wed Oct 26 11:37:38 2011] ../../acisf06416/products/lightcurves/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.lc and ../../acisf06416/products/lightcurves/fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Wed Oct 26 11:38:15 2011] 194.143
[Wed Oct 26 11:40:39 2011] Updating aperture counts using extracted products
[Wed Oct 26 11:40:39 2011] Error reading totcts from fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25_src.pi.gz
[Wed Oct 26 11:40:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 11:40:39 2011] Using photon index=1.80, rate=0.00184, arf fullrun_ccd6_acisf06416_pi14-548_pass1_cl_src25.arf
[Wed Oct 26 11:40:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 11:40:39 2011] Updating source flux to 2e-14
[Wed Oct 26 11:41:38 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting