[Sun Oct 23 10:37:06 2011] Detection parameters:
  Position = (494.4, 503.5) = 5 22 44.99 33 22 11.1
  Extent = 1.9" x 1.0", rotation angle = 18 degrees
  Source counts = 53.9 +/- 8.2
  Background counts = 14.1
  Rate = 0.0004 +/- 7e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 6.27'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 1.77 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 1.77"
[Sun Oct 23 10:39:48 2011] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.073
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 46 for pass 0, mean size = 1.77"
[Sun Oct 23 10:39:54 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46.ximg exists
[Sun Oct 23 10:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46.csv
[Sun Oct 23 10:39:54 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46_1.ximg exists
[Sun Oct 23 10:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46.csv
[Sun Oct 23 10:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Sun Oct 23 10:39:56 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 76.999800, observed total counts = 77.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 9 = 0.767269 pixels
[Sun Oct 23 10:40:55 2011] 77.780100 total counts/ 40.979100 bgd. counts: snr = 5.748816
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.767269 pixels
  Position = (493.8, 503.9) = 5 22 45.03 33 22 11.1
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 36.8 +/- 8.8
  Background counts = 41.0
  Rate = 0.0003 +/- 7e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sun Oct 23 10:42:02 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 0.82"
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46.csv
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46_1.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46.csv
[Sun Oct 23 10:42:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Sun Oct 23 10:42:11 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src46 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 57.999800, observed total counts = 58.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 9 = 0.040406 pixels
[Sun Oct 23 10:43:08 2011] 57.989800 total counts/ 21.238900 bgd. counts: snr = 7.974473
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.040406 pixels
  Position = (493.7, 504.0) = 5 22 45.03 33 22 11.1
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 36.8 +/- 7.6
  Background counts = 21.2
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:29 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 23 10:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (457, 467) - (531, 541)
[Sun Oct 23 10:56:29 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9.gif
[Sun Oct 23 10:58:44 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 23 10:58:44 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.evt.gz[events] = 48 counts
[Sun Oct 23 10:58:44 2011] Mean chipx,y = (615.67, 327.67)
[Sun Oct 23 10:58:44 2011] Mean tdetx,y = (4804.33, 3676.67)
[Sun Oct 23 10:58:44 2011] chipx,y range = (597.00-633.00, 309.00-348.00)
[Sun Oct 23 10:58:44 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 74 counts
[Sun Oct 23 10:58:44 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 23 10:58:44 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 23 10:58:44 2011] Not generating rmf since there are only 36 counts
[Sun Oct 23 10:58:47 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:30 2011] 181.36
[Sun Oct 23 11:07:03 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:03 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.000291, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src9.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 4e-15
[Sun Oct 23 11:08:38 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting