[Sun Oct 23 10:37:11 2011] Detection parameters:
  Position = (434.9, 928.8) = 5 22 47.32 33 25 40.4
  Extent = 0.5" x 0.5", rotation angle = 50 degrees
  Source counts = 59.7 +/- 8.1
  Background counts = 5.3
  Rate = 0.0005 +/- 6e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 2.75'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sun Oct 23 10:39:48 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.896
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 0.53"
[Sun Oct 23 10:39:53 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40.ximg exists
[Sun Oct 23 10:39:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40.csv
[Sun Oct 23 10:39:53 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40_1.ximg exists
[Sun Oct 23 10:39:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40.csv
[Sun Oct 23 10:39:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src40.ximg exists
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src40_1.ximg exists
[Sun Oct 23 10:39:56 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src40 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 86.999900, observed total counts = 87.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 89 = 0.728528 pixels
[Sun Oct 23 10:40:55 2011] 86.889800 total counts/ 28.882700 bgd. counts: snr = 10.793499
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 0.728528 pixels
  Position = (435.4, 929.4) = 5 22 47.32 33 25 40.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 58.0 +/- 9.3
  Background counts = 28.9
  Rate = 0.0005 +/- 7e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sun Oct 23 10:42:02 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.897
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 40 for pass 1, mean size = 0.53"
[Sun Oct 23 10:42:06 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40.ximg exists
[Sun Oct 23 10:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40.csv
[Sun Oct 23 10:42:06 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40_1.ximg exists
[Sun Oct 23 10:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40.csv
[Sun Oct 23 10:42:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src40.ximg exists
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Oct 23 10:42:11 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src40 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 86.999800, observed total counts = 87.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 89 = 0.000026 pixels
[Sun Oct 23 10:43:08 2011] 86.889600 total counts/ 28.870100 bgd. counts: snr = 10.798162
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 0.000026 pixels
  Position = (435.4, 929.4) = 5 22 47.32 33 25 40.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 58.0 +/- 9.3
  Background counts = 28.9
  Rate = 0.0005 +/- 7e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:28 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.reg
[Sun Oct 23 10:56:28 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (411, 905) - (460, 954)
[Sun Oct 23 10:56:29 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89.gif
[Sun Oct 23 10:58:28 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_bgd.evt exist, delete to re-create
[Sun Oct 23 10:58:28 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.evt.gz[events] = 64 counts
[Sun Oct 23 10:58:28 2011] Mean chipx,y = (796.69, 716.50)
[Sun Oct 23 10:58:28 2011] Mean tdetx,y = (4415.50, 3857.69)
[Sun Oct 23 10:58:28 2011] chipx,y range = (779.00-817.00, 701.00-739.00)
[Sun Oct 23 10:58:28 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_bgd.evt.gz[events] = 35 counts
[Sun Oct 23 10:58:28 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_bgd.img exist, delete to re-create
[Sun Oct 23 10:58:28 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_bgd.pi exist, delete to re-create
[Sun Oct 23 10:58:28 2011] Not generating rmf since there are only 58 counts
[Sun Oct 23 10:58:30 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:30 2011] 198.129
[Sun Oct 23 11:07:03 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:03 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89_src.pi.gz
[Sun Oct 23 11:07:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:05 2011] Using photon index=1.80, rate=0.00046, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src89.arf
[Sun Oct 23 11:07:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:05 2011] Updating source flux to 5.8e-15
[Sun Oct 23 11:08:38 2011] Source 89 has fewer than 100.000000 counts, skipping spectral fitting