[Sun Oct 23 10:37:08 2011] Detection parameters:
  Position = (367.3, 802.3) = 5 22 49.98 33 24 38.1
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 54.6 +/- 7.7
  Background counts = 4.4
  Rate = 0.0004 +/- 6e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 3.73'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sun Oct 23 10:39:48 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 0.75"
[Sun Oct 23 10:39:54 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45.ximg exists
[Sun Oct 23 10:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45.csv
[Sun Oct 23 10:39:54 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45_1.ximg exists
[Sun Oct 23 10:39:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45.csv
[Sun Oct 23 10:39:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src45.ximg exists
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Oct 23 10:39:56 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 66.598500, observed total counts = 67.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 36 = 0.852469 pixels
[Sun Oct 23 10:40:55 2011] 66.561000 total counts/ 11.286700 bgd. counts: snr = 16.452798
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.852469 pixels
  Position = (367.8, 802.9) = 5 22 49.98 33 24 38.2
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 55.3 +/- 8.2
  Background counts = 11.3
  Rate = 0.0004 +/- 6e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Oct 23 10:42:02 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.139
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 0.55"
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45.csv
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45_1.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45.csv
[Sun Oct 23 10:42:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src45.ximg exists
[Sun Oct 23 10:42:11 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Oct 23 10:42:11 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src45 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 67.988000, observed total counts = 68.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 36 = 0.009505 pixels
[Sun Oct 23 10:43:08 2011] 68.311400 total counts/ 13.142300 bgd. counts: snr = 15.218092
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.009505 pixels
  Position = (367.9, 802.9) = 5 22 49.98 33 24 38.2
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 55.2 +/- 8.3
  Background counts = 13.1
  Rate = 0.0004 +/- 7e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:29 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.reg
[Sun Oct 23 10:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (343, 778) - (393, 828)
[Sun Oct 23 10:56:29 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36.gif
[Sun Oct 23 10:58:41 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sun Oct 23 10:58:41 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.evt.gz[events] = 58 counts
[Sun Oct 23 10:58:41 2011] Mean chipx,y = (822.79, 575.33)
[Sun Oct 23 10:58:41 2011] Mean tdetx,y = (4556.67, 3883.79)
[Sun Oct 23 10:58:41 2011] chipx,y range = (806.00-841.00, 559.00-594.00)
[Sun Oct 23 10:58:41 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 36 counts
[Sun Oct 23 10:58:41 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Sun Oct 23 10:58:41 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sun Oct 23 10:58:41 2011] Not generating rmf since there are only 55 counts
[Sun Oct 23 10:58:44 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:30 2011] 194.985
[Sun Oct 23 11:07:03 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:03 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.000437, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src36.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 5.6e-15
[Sun Oct 23 11:08:38 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting