[Sun Oct 23 10:37:06 2011] Detection parameters:
  Position = (427.0, 475.4) = 5 22 47.64 33 21 57.3
  Extent = 1.8" x 1.1", rotation angle = 10 degrees
  Source counts = 343.8 +/- 19.4
  Background counts = 32.2
  Rate = 0.003 +/- 0.0002

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 6.43'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 1.85 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 1.85"
[Sun Oct 23 10:39:48 2011] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.988
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.85"
[Sun Oct 23 10:39:52 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 10:39:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:52 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 10:39:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:39:55 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 389.909000, observed total counts = 390.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 3 = 1.072932 pixels
[Sun Oct 23 10:40:55 2011] 389.908800 total counts/ 75.808800 bgd. counts: snr = 36.075148
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.072932 pixels
  Position = (427.9, 475.8) = 5 22 47.62 33 21 57.2
  Extent = 1.4 (1.2-1.5)", rotation angle = 0
  Source counts = 314.1 +/- 19.7
  Background counts = 75.8
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Sun Oct 23 10:42:02 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.849
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.36"
[Sun Oct 23 10:42:05 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 10:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:42:05 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 10:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:42:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:42:08 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 362.302000, observed total counts = 364.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 3 = 0.144826 pixels
[Sun Oct 23 10:43:08 2011] 364.181600 total counts/ 79.755600 bgd. counts: snr = 31.848479
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.144826 pixels
  Position = (427.8, 475.8) = 5 22 47.62 33 21 57.2
  Extent = 1.2 (1.1-1.3)", rotation angle = 0
  Source counts = 284.4 +/- 19.1
  Background counts = 79.8
  Rate = 0.002 +/- 0.0002
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:27 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 23 10:56:27 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (372, 420) - (483, 531)
[Sun Oct 23 10:56:27 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3.gif
[Sun Oct 23 10:56:38 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 23 10:56:38 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.evt.gz[events] = 345 counts
[Sun Oct 23 10:56:38 2011] Mean chipx,y = (668.19, 281.59)
[Sun Oct 23 10:56:38 2011] Mean tdetx,y = (4850.41, 3729.19)
[Sun Oct 23 10:56:38 2011] chipx,y range = (645.00-691.00, 260.00-305.00)
[Sun Oct 23 10:56:38 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 97 counts
[Sun Oct 23 10:56:38 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 23 10:56:38 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Oct 23 10:56:41 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:27 2011] Keeping rmf generated by specextract
[Sun Oct 23 11:06:27 2011] 180.795
[Sun Oct 23 11:07:02 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:02 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 23 11:07:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:05 2011] Using photon index=1.80, rate=0.00225, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3.arf
[Sun Oct 23 11:07:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:05 2011] Updating source flux to 3.1e-14
[Sun Oct 23 11:09:36 2011] Reading fit data from acisf06407/analysis//spectral/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_pl.csv
[Sun Oct 23 11:09:36 2011] Spectral fit parameter nH value = 3.39851e+21
[Sun Oct 23 11:09:36 2011] Spectral fit parameter PhoIndex value = 2.19752
[Sun Oct 23 11:09:36 2011] Failed to get F(0.3-8.0) from acisf06407/analysis//spectral/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 11:09:36 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:09:36 2011] Using Nh = 3.4e+21, photon index=2.20, rate=0.00225, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src3.arf
[Sun Oct 23 11:09:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:09:36 2011] Updating source flux to 2.5e-14