[Sun Oct 23 10:37:15 2011] Detection parameters:
  Position = (396.5, 1211.3) = 5 22 48.83 33 27 59.3
  Extent = 0.5" x 0.5", rotation angle = 56 degrees
  Source counts = 25.7 +/- 5.3
  Background counts = 2.3
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 0.46'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 23 10:39:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.327
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 99 for pass 0, mean size = 0.39"
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99.csv
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99_1.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99.csv
[Sun Oct 23 10:39:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:59 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src99.ximg exists
[Sun Oct 23 10:39:59 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src99_1.ximg exists
[Sun Oct 23 10:39:59 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src99 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 51.141400, observed total counts = 51.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 156 = 0.727289 pixels
[Sun Oct 23 10:40:55 2011] 52.066300 total counts/ 29.047800 bgd. counts: snr = 4.270910
Spatial fit parameters:
  Offset between fit and detection position for source 156 = 0.727289 pixels
  Position = (397.0, 1211.8) = 5 22 48.83 33 27 59.3
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 23.0 +/- 7.2
  Background counts = 29.0
  Rate = 0.0002 +/- 6e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.27"
[Sun Oct 23 10:42:02 2011] source mask rpix=0.6, npix_max = 4, mask sum = 4, frac = 0.896
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 99 for pass 1, mean size = 0.27"
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99.ximg exists
[Sun Oct 23 10:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99.csv
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99_1.ximg exists
[Sun Oct 23 10:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99.csv
[Sun Oct 23 10:42:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:13 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src99.ximg exists
[Sun Oct 23 10:42:13 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src99_1.ximg exists
[Sun Oct 23 10:42:13 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src99 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 55.992500, observed total counts = 56.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 156 = 0.005974 pixels
[Sun Oct 23 10:43:08 2011] 57.267100 total counts/ 34.552600 bgd. counts: snr = 3.864229
Spatial fit parameters:
  Offset between fit and detection position for source 156 = 0.005974 pixels
  Position = (397.0, 1211.8) = 5 22 48.83 33 27 59.3
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 22.7 +/- 7.6
  Background counts = 34.6
  Rate = 0.0002 +/- 6e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:30 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.reg
[Sun Oct 23 10:56:30 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (385, 1199) - (409, 1224)
[Sun Oct 23 10:56:30 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156.gif
[Sun Oct 23 11:01:09 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_bgd.evt exist, delete to re-create
[Sun Oct 23 11:01:09 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.evt.gz[events] = 25 counts
[Sun Oct 23 11:01:09 2011] Mean chipx,y = (921.44, 976.44)
[Sun Oct 23 11:01:09 2011] Mean tdetx,y = (4155.56, 3982.44)
[Sun Oct 23 11:01:09 2011] chipx,y range = (903.00-937.00, 961.00-994.00)
[Sun Oct 23 11:01:09 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_bgd.evt.gz[events] = 8 counts
[Sun Oct 23 11:01:09 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_bgd.img exist, delete to re-create
[Sun Oct 23 11:01:09 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_bgd.pi exist, delete to re-create
[Sun Oct 23 11:01:09 2011] Not generating rmf since there are only 22 counts
[Sun Oct 23 11:01:12 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:32 2011] 202.382
[Sun Oct 23 11:07:04 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:04 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.00018, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src156.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 2.2e-15
[Sun Oct 23 11:08:38 2011] Source 156 has fewer than 100.000000 counts, skipping spectral fitting