[Sun Oct 23 10:37:14 2011] Detection parameters:
  Position = (291.3, 1135.7) = 5 22 52.97 33 27 22.1
  Extent = 0.5" x 0.5", rotation angle = 77 degrees
  Source counts = 28.6 +/- 5.6
  Background counts = 2.4
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 1.16'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 23 10:39:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 90 for pass 0, mean size = 0.38"
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90.csv
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90_1.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90.csv
[Sun Oct 23 10:39:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:59 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src90.ximg exists
[Sun Oct 23 10:39:59 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src90_1.ximg exists
[Sun Oct 23 10:39:59 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src90 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 40.000000, observed total counts = 40.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 148 = 0.630574 pixels
[Sun Oct 23 10:40:55 2011] 40.105900 total counts/ 10.648200 bgd. counts: snr = 9.027359
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.630574 pixels
  Position = (291.7, 1136.1) = 5 22 52.97 33 27 22.1
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 29.5 +/- 6.3
  Background counts = 10.6
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct 23 10:42:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.167
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 90 for pass 1, mean size = 0.44"
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90.ximg exists
[Sun Oct 23 10:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90.csv
[Sun Oct 23 10:42:08 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90_1.ximg exists
[Sun Oct 23 10:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90.csv
[Sun Oct 23 10:42:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:13 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src90.ximg exists
[Sun Oct 23 10:42:13 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src90_1.ximg exists
[Sun Oct 23 10:42:13 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src90 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 38.996400, observed total counts = 39.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 148 = 0.002129 pixels
[Sun Oct 23 10:43:08 2011] 39.404450 total counts/ 9.848050 bgd. counts: snr = 9.418384
Spatial fit parameters:
  Offset between fit and detection position for source 148 = 0.002129 pixels
  Position = (291.7, 1136.1) = 5 22 52.97 33 27 22.1
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 29.6 +/- 6.3
  Background counts = 9.8
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:30 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.reg
[Sun Oct 23 10:56:30 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (272, 1116) - (312, 1156)
[Sun Oct 23 10:56:30 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148.gif
[Sun Oct 23 11:00:43 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_bgd.evt exist, delete to re-create
[Sun Oct 23 11:00:43 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.evt.gz[events] = 31 counts
[Sun Oct 23 11:00:43 2011] Mean chipx,y = (1000.39, 870.26)
[Sun Oct 23 11:00:43 2011] Mean tdetx,y = (4261.74, 4061.39)
[Sun Oct 23 11:00:43 2011] chipx,y range = (981.00-1013.00, 856.00-891.00)
[Sun Oct 23 11:00:43 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_bgd.evt.gz[events] = 14 counts
[Sun Oct 23 11:00:43 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_bgd.img exist, delete to re-create
[Sun Oct 23 11:00:43 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_bgd.pi exist, delete to re-create
[Sun Oct 23 11:00:43 2011] Not generating rmf since there are only 29 counts
[Sun Oct 23 11:00:46 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:31 2011] 203.681
[Sun Oct 23 11:07:04 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:04 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.000234, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src148.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 2.9e-15
[Sun Oct 23 11:08:38 2011] Source 148 has fewer than 100.000000 counts, skipping spectral fitting