[Sun Oct 23 10:37:13 2011] Detection parameters:
  Position = (411.3, 1028.9) = 5 22 48.25 33 26 29.6
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 43.3 +/- 6.9
  Background counts = 3.7
  Rate = 0.0003 +/- 5e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 1.91'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 23 10:39:48 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.815
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.42"
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65.csv
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65_1.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65.csv
[Sun Oct 23 10:39:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:57 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Sun Oct 23 10:39:57 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Sun Oct 23 10:39:57 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 56.243400, observed total counts = 56.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 123 = 0.707038 pixels
[Sun Oct 23 10:40:55 2011] 56.134200 total counts/ 11.933800 bgd. counts: snr = 12.794898
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.707038 pixels
  Position = (411.9, 1029.2) = 5 22 48.24 33 26 29.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 44.2 +/- 7.5
  Background counts = 11.9
  Rate = 0.0004 +/- 6e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct 23 10:42:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.772
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 0.44"
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65.csv
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65_1.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65.csv
[Sun Oct 23 10:42:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:12 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Sun Oct 23 10:42:12 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Sun Oct 23 10:42:12 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 53.999700, observed total counts = 54.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 123 = 0.002307 pixels
[Sun Oct 23 10:43:08 2011] 53.868300 total counts/ 9.701800 bgd. counts: snr = 14.179693
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 0.002307 pixels
  Position = (411.9, 1029.2) = 5 22 48.24 33 26 29.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 44.2 +/- 7.3
  Background counts = 9.7
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:29 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.reg
[Sun Oct 23 10:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (392, 1009) - (432, 1050)
[Sun Oct 23 10:56:29 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123.gif
[Sun Oct 23 10:59:35 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_bgd.evt exist, delete to re-create
[Sun Oct 23 10:59:35 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.evt.gz[events] = 45 counts
[Sun Oct 23 10:59:35 2011] Mean chipx,y = (850.40, 807.87)
[Sun Oct 23 10:59:35 2011] Mean tdetx,y = (4324.13, 3911.40)
[Sun Oct 23 10:59:35 2011] chipx,y range = (832.00-867.00, 790.00-824.00)
[Sun Oct 23 10:59:35 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_bgd.evt.gz[events] = 23 counts
[Sun Oct 23 10:59:35 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_bgd.img exist, delete to re-create
[Sun Oct 23 10:59:35 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_bgd.pi exist, delete to re-create
[Sun Oct 23 10:59:35 2011] Not generating rmf since there are only 44 counts
[Sun Oct 23 10:59:37 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:30 2011] 201.332
[Sun Oct 23 11:07:03 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:03 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.00035, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src123.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 4.4e-15
[Sun Oct 23 11:08:38 2011] Source 123 has fewer than 100.000000 counts, skipping spectral fitting