[Sun Oct 23 10:37:13 2011] Detection parameters:
  Position = (519.6, 1022.3) = 5 22 43.99 33 26 26.4
  Extent = 0.5" x 0.5", rotation angle = 40 degrees
  Source counts = 168.5 +/- 13.2
  Background counts = 5.5
  Rate = 0.001 +/- 0.0001

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 2.31'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sun Oct 23 10:39:48 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.075
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.47"
[Sun Oct 23 10:39:52 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 23 10:39:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 10:39:52 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 23 10:39:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9.csv
[Sun Oct 23 10:39:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 23 10:39:56 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 23 10:39:56 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 185.740000, observed total counts = 185.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 121 = 0.845352 pixels
[Sun Oct 23 10:40:55 2011] 185.082200 total counts/ 19.227200 bgd. counts: snr = 37.824269
Spatial fit parameters:
  Offset between fit and detection position for source 121 = 0.845352 pixels
  Position = (520.2, 1023.0) = 5 22 43.99 33 26 26.4
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 165.9 +/- 13.6
  Background counts = 19.2
  Rate = 0.001 +/- 0.0001
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Oct 23 10:42:02 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.725
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.46"
[Sun Oct 23 10:42:05 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 23 10:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 10:42:05 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 23 10:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9.csv
[Sun Oct 23 10:42:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:09 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 23 10:42:09 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 23 10:42:09 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 189.398000, observed total counts = 191.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 121 = 0.001944 pixels
[Sun Oct 23 10:43:08 2011] 188.837700 total counts/ 25.510700 bgd. counts: snr = 32.336782
Spatial fit parameters:
  Offset between fit and detection position for source 121 = 0.001944 pixels
  Position = (520.2, 1023.0) = 5 22 43.99 33 26 26.4
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 163.3 +/- 13.7
  Background counts = 25.5
  Rate = 0.001 +/- 0.0001
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:28 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.reg
[Sun Oct 23 10:56:28 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (499, 1002) - (541, 1044)
[Sun Oct 23 10:56:28 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121.gif
[Sun Oct 23 10:57:03 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_bgd.evt exist, delete to re-create
[Sun Oct 23 10:57:03 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.evt.gz[events] = 168 counts
[Sun Oct 23 10:57:03 2011] Mean chipx,y = (744.98, 832.62)
[Sun Oct 23 10:57:03 2011] Mean tdetx,y = (4299.38, 3805.98)
[Sun Oct 23 10:57:03 2011] chipx,y range = (726.00-763.00, 815.00-852.00)
[Sun Oct 23 10:57:03 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_bgd.evt.gz[events] = 18 counts
[Sun Oct 23 10:57:03 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_bgd.img exist, delete to re-create
[Sun Oct 23 10:57:03 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_bgd.pi exist, delete to re-create
[Sun Oct 23 10:57:06 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:27 2011] Keeping rmf generated by specextract
[Sun Oct 23 11:06:27 2011] 198.29
[Sun Oct 23 11:07:02 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:02 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121_src.pi.gz
[Sun Oct 23 11:07:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:05 2011] Using photon index=1.80, rate=0.00129, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src121.arf
[Sun Oct 23 11:07:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:05 2011] Updating source flux to 1.6e-14