[Sun Oct 23 10:37:12 2011] Detection parameters:
  Position = (344.7, 952.4) = 5 22 50.87 33 25 52.0
  Extent = 0.7" x 0.5", rotation angle = 93 degrees
  Source counts = 33.0 +/- 6.2
  Background counts = 5.0
  Rate = 0.0003 +/- 5e-05

[Sun Oct 23 10:37:19 2011] Off-axis axis estimate = 2.50'
[Sun Oct 23 10:39:48 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:48 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 23 10:39:48 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Sun Oct 23 10:39:48 2011] Giving source the simple spatial ID 78 for pass 0, mean size = 0.49"
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78.csv
[Sun Oct 23 10:39:55 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78_1.ximg exists
[Sun Oct 23 10:39:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78.csv
[Sun Oct 23 10:39:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:58 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src78.ximg exists
[Sun Oct 23 10:39:58 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src78_1.ximg exists
[Sun Oct 23 10:39:58 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass0_tfrozen_src78 appears to have run properly
[Sun Oct 23 10:40:55 2011] Spatial fit model total counts = 40.866300, observed total counts = 41.000000
[Sun Oct 23 10:40:55 2011] Offset between fit and detection position for source 101 = 1.184835 pixels
[Sun Oct 23 10:40:55 2011] 40.612630 total counts/ 9.828130 bgd. counts: snr = 9.819665
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 1.184835 pixels
  Position = (345.5, 953.3) = 5 22 50.86 33 25 52.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 30.8 +/- 6.4
  Background counts = 9.8
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:55 2011] Source does appear to be extended
[Sun Oct 23 10:40:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:42:02 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 23 10:42:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.219
[Sun Oct 23 10:42:02 2011] Giving source the simple spatial ID 78 for pass 1, mean size = 0.42"
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78.csv
[Sun Oct 23 10:42:07 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78_1.ximg exists
[Sun Oct 23 10:42:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78.csv
[Sun Oct 23 10:42:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06407_pi14-548_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:12 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src78.ximg exists
[Sun Oct 23 10:42:12 2011] fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src78_1.ximg exists
[Sun Oct 23 10:42:12 2011] Fit fullrun_ccd3_acisf06407_pi14-548_cl_pass1_tfrozen_src78 appears to have run properly
[Sun Oct 23 10:43:08 2011] Spatial fit model total counts = 40.940600, observed total counts = 41.000000
[Sun Oct 23 10:43:08 2011] Offset between fit and detection position for source 101 = 0.018262 pixels
[Sun Oct 23 10:43:08 2011] 40.286910 total counts/ 9.263810 bgd. counts: snr = 10.192727
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 0.018262 pixels
  Position = (345.5, 953.3) = 5 22 50.86 33 25 52.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 31.0 +/- 6.3
  Background counts = 9.3
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:43:08 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:43:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:43:08 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:43:08 2011] Source does appear to be extended
[Sun Oct 23 10:43:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:56:29 2011] Not overwriting source region fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.reg
[Sun Oct 23 10:56:29 2011] Extracting stamp from image fullrun_ccd3_acisf06407_pi14-548_cl_sm2.00.img.gz, (326, 934) - (365, 973)
[Sun Oct 23 10:56:29 2011] Writing fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101.gif
[Sun Oct 23 11:00:10 2011] ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.evt and ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_bgd.evt exist, delete to re-create
[Sun Oct 23 11:00:10 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.evt.gz[events] = 33 counts
[Sun Oct 23 11:00:10 2011] Mean chipx,y = (890.39, 714.15)
[Sun Oct 23 11:00:10 2011] Mean tdetx,y = (4417.85, 3951.39)
[Sun Oct 23 11:00:10 2011] chipx,y range = (874.00-908.00, 697.00-731.00)
[Sun Oct 23 11:00:10 2011] Size of ../../acisf06407/products/events/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_bgd.evt.gz[events] = 20 counts
[Sun Oct 23 11:00:10 2011] ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.img and ../../acisf06407/products/images/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_bgd.img exist, delete to re-create
[Sun Oct 23 11:00:10 2011] ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.pi and ../../acisf06407/products/spectra/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_bgd.pi exist, delete to re-create
[Sun Oct 23 11:00:10 2011] Not generating rmf since there are only 31 counts
[Sun Oct 23 11:00:13 2011] ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_bgd.lc exist, delete to re-create
[Sun Oct 23 11:06:31 2011] 200.231
[Sun Oct 23 11:07:03 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:03 2011] Error reading totcts from fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101_src.pi.gz
[Sun Oct 23 11:07:06 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:06 2011] Using photon index=1.80, rate=0.000246, arf fullrun_ccd3_acisf06407_pi14-548_pass1_cl_src101.arf
[Sun Oct 23 11:07:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:06 2011] Updating source flux to 3.1e-15
[Sun Oct 23 11:08:38 2011] Source 101 has fewer than 100.000000 counts, skipping spectral fitting