[Sun Oct 23 10:37:04 2011] Detection parameters:
  Position = (385.4, 895.8) = 5 22 36.99 33 33 32.1
  Extent = 0.5" x 0.5", rotation angle = 53 degrees
  Source counts = 24.9 +/- 5.4
  Background counts = 4.1
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:05 2011] Off-axis axis estimate = 5.85'
[Sun Oct 23 10:39:41 2011] Using EEF radius (= 1.56 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:41 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Sun Oct 23 10:39:41 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Sun Oct 23 10:39:41 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 1.56"
[Sun Oct 23 10:39:44 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26.ximg exists
[Sun Oct 23 10:39:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26.csv
[Sun Oct 23 10:39:44 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Oct 23 10:39:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26.csv
[Sun Oct 23 10:39:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Oct 23 10:39:48 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Oct 23 10:40:42 2011] Spatial fit model total counts = 50.501600, observed total counts = 51.000000
[Sun Oct 23 10:40:42 2011] Offset between fit and detection position for source 50 = 1.779237 pixels
[Sun Oct 23 10:40:42 2011] 50.664300 total counts/ 15.743400 bgd. counts: snr = 8.801084
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.779237 pixels
  Position = (385.6, 897.5) = 5 22 37.00 33 33 32.7
  Extent = 1.5 (0.9-2.4)", rotation angle = 0
  Source counts = 34.9 +/- 7.1
  Background counts = 15.7
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:40:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:42 2011] Source does appear to be extended
[Sun Oct 23 10:40:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:54 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Sun Oct 23 10:41:54 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.008
[Sun Oct 23 10:41:54 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 1.47"
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26.csv
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26_1.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26.csv
[Sun Oct 23 10:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:01 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Sun Oct 23 10:42:02 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Oct 23 10:42:02 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Oct 23 10:42:55 2011] Spatial fit model total counts = 50.591700, observed total counts = 51.000000
[Sun Oct 23 10:42:55 2011] Offset between fit and detection position for source 50 = 0.763320 pixels
[Sun Oct 23 10:42:55 2011] 50.235900 total counts/ 19.073400 bgd. counts: snr = 7.135399
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.763320 pixels
  Position = (385.2, 898.2) = 5 22 37.01 33 33 33.1
  Extent = 1.4 (0.9-2.2)", rotation angle = 0
  Source counts = 31.2 +/- 7.1
  Background counts = 19.1
  Rate = 0.0002 +/- 6e-05
[Sun Oct 23 10:42:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:55 2011] Source does appear to be extended
[Sun Oct 23 10:42:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:53:57 2011] Not overwriting source region fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.reg
[Sun Oct 23 10:53:57 2011] Extracting stamp from image fullrun_ccd2_acisf06407_pi14-548_cl_sm2.00.img.gz, (323, 836) - (448, 961)
[Sun Oct 23 10:53:57 2011] Writing fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50.gif
[Sun Oct 23 10:55:11 2011] ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.evt and ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_bgd.evt exist, delete to re-create
[Sun Oct 23 10:55:11 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.evt.gz[events] = 53 counts
[Sun Oct 23 10:55:11 2011] Mean chipx,y = (192.66, 355.21)
[Sun Oct 23 10:55:11 2011] Mean tdetx,y = (3416.21, 3893.34)
[Sun Oct 23 10:55:11 2011] chipx,y range = (170.00-210.00, 336.00-375.00)
[Sun Oct 23 10:55:11 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_bgd.evt.gz[events] = 148 counts
[Sun Oct 23 10:55:11 2011] ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.img and ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_bgd.img exist, delete to re-create
[Sun Oct 23 10:55:11 2011] ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.pi and ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_bgd.pi exist, delete to re-create
[Sun Oct 23 10:55:11 2011] Not generating rmf since there are only 31 counts
[Sun Oct 23 10:55:14 2011] ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_bgd.lc exist, delete to re-create
[Sun Oct 23 10:56:27 2011] 177.264
[Sun Oct 23 11:07:01 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:01 2011] Error reading totcts from fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50_src.pi.gz
[Sun Oct 23 11:07:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:02 2011] Using photon index=1.80, rate=0.000247, arf fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src50.arf
[Sun Oct 23 11:07:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:02 2011] Updating source flux to 3.4e-15
[Sun Oct 23 11:08:29 2011] Source 50 has fewer than 100.000000 counts, skipping spectral fitting