[Sun Oct 23 10:37:03 2011] Detection parameters:
  Position = (476.5, 375.7) = 5 22 33.41 33 29 16.2
  Extent = 0.8" x 0.5", rotation angle = 107 degrees
  Source counts = 14.8 +/- 4.2
  Background counts = 3.2
  Rate = 0.0001 +/- 3e-05

[Sun Oct 23 10:37:05 2011] Off-axis axis estimate = 3.60'
[Sun Oct 23 10:39:41 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:41 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sun Oct 23 10:39:41 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.783
[Sun Oct 23 10:39:41 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 0.72"
[Sun Oct 23 10:39:45 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36.ximg exists
[Sun Oct 23 10:39:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36.csv
[Sun Oct 23 10:39:45 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36_1.ximg exists
[Sun Oct 23 10:39:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36.csv
[Sun Oct 23 10:39:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Sun Oct 23 10:39:48 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Sun Oct 23 10:40:42 2011] Spatial fit model total counts = 28.204500, observed total counts = 28.000000
[Sun Oct 23 10:40:42 2011] Offset between fit and detection position for source 43 = 1.293264 pixels
[Sun Oct 23 10:40:42 2011] 27.400600 total counts/ 7.947000 bgd. counts: snr = 6.900783
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.293264 pixels
  Position = (477.8, 376.0) = 5 22 33.38 33 29 16.1
  Extent = 0.9 (0.3-1.2)", rotation angle = 0
  Source counts = 19.5 +/- 5.2
  Background counts = 7.9
  Rate = 0.0002 +/- 4e-05
[Sun Oct 23 10:40:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:42 2011] Source does appear to be extended
[Sun Oct 23 10:40:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:54 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Sun Oct 23 10:41:54 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Sun Oct 23 10:41:54 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.93"
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36.csv
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36_1.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36.csv
[Sun Oct 23 10:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:02 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Sun Oct 23 10:42:02 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Oct 23 10:42:02 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Oct 23 10:42:55 2011] Spatial fit model total counts = 26.057900, observed total counts = 26.000000
[Sun Oct 23 10:42:55 2011] Offset between fit and detection position for source 43 = 0.207067 pixels
[Sun Oct 23 10:42:55 2011] 25.394400 total counts/ 4.788500 bgd. counts: snr = 9.416551
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.207067 pixels
  Position = (478.0, 376.0) = 5 22 33.38 33 29 16.1
  Extent = 1.0 (0.4-1.4)", rotation angle = 0
  Source counts = 20.6 +/- 5.0
  Background counts = 4.8
  Rate = 0.0002 +/- 4e-05
[Sun Oct 23 10:42:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:55 2011] Source does appear to be extended
[Sun Oct 23 10:42:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:53:57 2011] Not overwriting source region fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.reg
[Sun Oct 23 10:53:57 2011] Extracting stamp from image fullrun_ccd2_acisf06407_pi14-548_cl_sm2.00.img.gz, (433, 331) - (523, 421)
[Sun Oct 23 10:53:57 2011] Writing fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43.gif
[Sun Oct 23 10:55:38 2011] ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.evt and ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sun Oct 23 10:55:38 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.evt.gz[events] = 24 counts
[Sun Oct 23 10:55:38 2011] Mean chipx,y = (434.71, 824.83)
[Sun Oct 23 10:55:38 2011] Mean tdetx,y = (3885.83, 3651.29)
[Sun Oct 23 10:55:38 2011] chipx,y range = (415.00-453.00, 808.00-842.00)
[Sun Oct 23 10:55:38 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 87 counts
[Sun Oct 23 10:55:38 2011] ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.img and ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Sun Oct 23 10:55:38 2011] ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.pi and ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sun Oct 23 10:55:38 2011] Not generating rmf since there are only 20 counts
[Sun Oct 23 10:55:41 2011] ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sun Oct 23 10:56:27 2011] 185.056
[Sun Oct 23 11:07:01 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:01 2011] Error reading totcts from fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43_src.pi.gz
[Sun Oct 23 11:07:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:02 2011] Using photon index=1.80, rate=0.000163, arf fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src43.arf
[Sun Oct 23 11:07:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:02 2011] Updating source flux to 2.2e-15
[Sun Oct 23 11:08:29 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting