[Sun Oct 23 10:37:00 2011] Detection parameters:
  Position = (581.1, 566.6) = 5 22 29.29 33 30 50.1
  Extent = 1.0" x 0.7", rotation angle = 86 degrees
  Source counts = 2321.0 +/- 48.7
  Background counts = 49.0
  Rate = 0.02 +/- 0.0004

[Sun Oct 23 10:37:05 2011] Off-axis axis estimate = 4.99'
[Sun Oct 23 10:39:41 2011] Using EEF radius (= 1.18 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:39:41 2011] Initial guess for spatial extent in simple fitting = 1.18"
[Sun Oct 23 10:39:41 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Sun Oct 23 10:39:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.18"
[Sun Oct 23 10:39:43 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 10:39:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:43 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 10:39:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:47 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 10:39:47 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:39:47 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:40:42 2011] Spatial fit model total counts = 2340.000000, observed total counts = 2340.000000
[Sun Oct 23 10:40:42 2011] Offset between fit and detection position for source 2 = 0.722919 pixels
[Sun Oct 23 10:40:42 2011] 2344.776000 total counts/ 193.966000 bgd. counts: snr = 154.432692
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.722919 pixels
  Position = (581.6, 567.2) = 5 22 29.30 33 30 50.1
  Extent = 1.0 (1.0-1.1)", rotation angle = 0
  Source counts = 2150.8 +/- 48.4
  Background counts = 194.0
  Rate = 0.02 +/- 0.0004
[Sun Oct 23 10:40:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:42 2011] Source does appear to be extended
[Sun Oct 23 10:40:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:41:54 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Sun Oct 23 10:41:54 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Sun Oct 23 10:41:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.04"
[Sun Oct 23 10:41:55 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 10:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:55 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 10:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:57 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 10:41:57 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:41:57 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:42:55 2011] Spatial fit model total counts = 2325.010000, observed total counts = 2325.000000
[Sun Oct 23 10:42:55 2011] Offset between fit and detection position for source 2 = 0.029095 pixels
[Sun Oct 23 10:42:55 2011] 2323.866000 total counts/ 200.966000 bgd. counts: snr = 149.750487
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.029095 pixels
  Position = (581.6, 567.2) = 5 22 29.29 33 30 50.1
  Extent = 1.0 (1.0-1.1)", rotation angle = 0
  Source counts = 2122.9 +/- 48.2
  Background counts = 201.0
  Rate = 0.02 +/- 0.0004
[Sun Oct 23 10:42:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:55 2011] Source does appear to be extended
[Sun Oct 23 10:42:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:53:56 2011] Not overwriting source region fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.reg
[Sun Oct 23 10:53:56 2011] Extracting stamp from image fullrun_ccd2_acisf06407_pi14-548_cl_sm2.00.img.gz, (535, 520) - (629, 614)
[Sun Oct 23 10:53:56 2011] Writing fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2.gif
[Sun Oct 23 10:53:59 2011] ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.evt and ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct 23 10:53:59 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.evt.gz[events] = 2299 counts
[Sun Oct 23 10:53:59 2011] Mean chipx,y = (475.92, 611.82)
[Sun Oct 23 10:53:59 2011] Mean tdetx,y = (3672.82, 3610.08)
[Sun Oct 23 10:53:59 2011] chipx,y range = (454.00-498.00, 588.00-635.00)
[Sun Oct 23 10:53:59 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 138 counts
[Sun Oct 23 10:53:59 2011] ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.img and ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct 23 10:53:59 2011] ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.pi and ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct 23 10:54:02 2011] ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct 23 10:56:26 2011] Keeping rmf generated by specextract
[Sun Oct 23 10:56:26 2011] 182.295
[Sun Oct 23 11:07:01 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:01 2011] Error reading totcts from fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct 23 11:07:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:02 2011] Using photon index=1.80, rate=0.0168, arf fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2.arf
[Sun Oct 23 11:07:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:02 2011] Updating source flux to 2.3e-13
[Sun Oct 23 11:08:37 2011] Reading fit data from acisf06407/analysis//spectral/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_pl.csv
[Sun Oct 23 11:08:37 2011] Spectral fit parameter nH value = 1.7848e+21
[Sun Oct 23 11:08:37 2011] Spectral fit parameter PhoIndex value = 3.06235
[Sun Oct 23 11:08:37 2011] Failed to get F(0.3-8.0) from acisf06407/analysis//spectral/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 11:08:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:08:37 2011] Using Nh = 1.8e+21, photon index=3.06, rate=0.0168, arf fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src2.arf
[Sun Oct 23 11:08:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:08:37 2011] Updating source flux to 1.6e-13