[Sun Oct 23 10:37:01 2011] Detection parameters:
  Position = (214.7, 354.9) = 5 22 43.71 33 29 6.1
  Extent = 0.5" x 0.5", rotation angle = 56 degrees
  Source counts = 20.7 +/- 4.8
  Background counts = 2.3
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:05 2011] Off-axis axis estimate = 1.52'
[Sun Oct 23 10:39:41 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:41 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 23 10:39:41 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.887
[Sun Oct 23 10:39:41 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.39"
[Sun Oct 23 10:39:44 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31.ximg exists
[Sun Oct 23 10:39:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31.csv
[Sun Oct 23 10:39:44 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31_1.ximg exists
[Sun Oct 23 10:39:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31.csv
[Sun Oct 23 10:39:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Sun Oct 23 10:39:48 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Oct 23 10:39:48 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Oct 23 10:40:42 2011] Spatial fit model total counts = 29.318600, observed total counts = 30.000000
[Sun Oct 23 10:40:42 2011] Offset between fit and detection position for source 13 = 0.758668 pixels
[Sun Oct 23 10:40:42 2011] 28.455340 total counts/ 8.498540 bgd. counts: snr = 6.845714
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.758668 pixels
  Position = (215.2, 355.5) = 5 22 43.71 33 29 6.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.0 +/- 5.3
  Background counts = 8.5
  Rate = 0.0002 +/- 4e-05
[Sun Oct 23 10:40:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:42 2011] Source does appear to be extended
[Sun Oct 23 10:40:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:54 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct 23 10:41:54 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.157
[Sun Oct 23 10:41:54 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 0.44"
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31.csv
[Sun Oct 23 10:41:56 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31_1.ximg exists
[Sun Oct 23 10:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31.csv
[Sun Oct 23 10:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06407_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:42:02 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Sun Oct 23 10:42:02 2011] fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Oct 23 10:42:02 2011] Fit fullrun_ccd2_acisf06407_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Oct 23 10:42:55 2011] Spatial fit model total counts = 29.191300, observed total counts = 30.000000
[Sun Oct 23 10:42:55 2011] Offset between fit and detection position for source 13 = 0.010186 pixels
[Sun Oct 23 10:42:55 2011] 28.279190 total counts/ 8.375090 bgd. counts: snr = 6.877772
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.010186 pixels
  Position = (215.2, 355.5) = 5 22 43.71 33 29 6.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.9 +/- 5.3
  Background counts = 8.4
  Rate = 0.0002 +/- 4e-05
[Sun Oct 23 10:42:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:55 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:55 2011] Source does appear to be extended
[Sun Oct 23 10:42:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:53:57 2011] Not overwriting source region fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.reg
[Sun Oct 23 10:53:57 2011] Extracting stamp from image fullrun_ccd2_acisf06407_pi14-548_cl_sm2.00.img.gz, (195, 336) - (235, 375)
[Sun Oct 23 10:53:57 2011] Writing fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13.gif
[Sun Oct 23 10:55:25 2011] ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.evt and ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Oct 23 10:55:25 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.evt.gz[events] = 21 counts
[Sun Oct 23 10:55:25 2011] Mean chipx,y = (191.67, 924.14)
[Sun Oct 23 10:55:25 2011] Mean tdetx,y = (3985.14, 3894.33)
[Sun Oct 23 10:55:25 2011] chipx,y range = (171.00-207.00, 909.00-941.00)
[Sun Oct 23 10:55:25 2011] Size of ../../acisf06407/products/events/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 14 counts
[Sun Oct 23 10:55:25 2011] ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.img and ../../acisf06407/products/images/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Oct 23 10:55:25 2011] ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.pi and ../../acisf06407/products/spectra/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Oct 23 10:55:25 2011] Not generating rmf since there are only 19 counts
[Sun Oct 23 10:55:27 2011] ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Oct 23 10:56:27 2011] 195.743
[Sun Oct 23 11:07:01 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:07:01 2011] Error reading totcts from fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Oct 23 11:07:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:02 2011] Using photon index=1.80, rate=0.000158, arf fullrun_ccd2_acisf06407_pi14-548_pass1_cl_src13.arf
[Sun Oct 23 11:07:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:02 2011] Updating source flux to 2e-15
[Sun Oct 23 11:08:29 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting