[Sun Oct 23 10:36:56 2011] Detection parameters:
  Position = (916.3, 908.5) = 5 23 7.71 33 28 7.7
  Extent = 0.9" x 0.7", rotation angle = 137 degrees
  Source counts = 27.3 +/- 5.7
  Background counts = 5.7
  Rate = 0.0002 +/- 5e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 3.68'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct 23 10:39:35 2011] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.248
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 60 for pass 0, mean size = 0.74"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src60.ximg exists
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Oct 23 10:39:40 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src60 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 36.528400, observed total counts = 37.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 80 = 1.286244 pixels
[Sun Oct 23 10:40:36 2011] 36.649100 total counts/ 11.829000 bgd. counts: snr = 7.216548
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 1.286244 pixels
  Position = (916.5, 909.8) = 5 23 7.72 33 28 8.1
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 24.8 +/- 6.1
  Background counts = 11.8
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Sun Oct 23 10:41:47 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.894
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 0.66"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Sun Oct 23 10:41:53 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src60 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 35.703300, observed total counts = 36.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 80 = 0.015985 pixels
[Sun Oct 23 10:42:47 2011] 35.837200 total counts/ 10.541300 bgd. counts: snr = 7.791177
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 0.015985 pixels
  Position = (916.5, 909.8) = 5 23 7.72 33 28 8.1
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 25.3 +/- 6.0
  Background counts = 10.5
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:34 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.reg
[Sun Oct 23 10:47:34 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (886, 879) - (947, 941)
[Sun Oct 23 10:47:34 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80.gif
[Sun Oct 23 10:50:28 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_bgd.evt exist, delete to re-create
[Sun Oct 23 10:50:28 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.evt.gz[events] = 29 counts
[Sun Oct 23 10:50:28 2011] Mean chipx,y = (337.45, 846.93)
[Sun Oct 23 10:50:28 2011] Mean tdetx,y = (4285.07, 4444.45)
[Sun Oct 23 10:50:28 2011] chipx,y range = (320.00-355.00, 830.00-867.00)
[Sun Oct 23 10:50:28 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_bgd.evt.gz[events] = 33 counts
[Sun Oct 23 10:50:28 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_bgd.img exist, delete to re-create
[Sun Oct 23 10:50:28 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_bgd.pi exist, delete to re-create
[Sun Oct 23 10:50:28 2011] Not generating rmf since there are only 25 counts
[Sun Oct 23 10:50:31 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:54 2011] 191.167
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.0002, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src80.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 2.6e-15
[Sun Oct 23 11:07:54 2011] Source 80 has fewer than 100.000000 counts, skipping spectral fitting