[Sun Oct 23 10:36:55 2011] Detection parameters:
  Position = (1208.8, 876.8) = 5 22 56.21 33 27 52.2
  Extent = 0.6" x 0.5", rotation angle = 112 degrees
  Source counts = 17.4 +/- 4.5
  Background counts = 2.6
  Rate = 0.0001 +/- 4e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 1.37'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Oct 23 10:39:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.605
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 84 for pass 0, mean size = 0.39"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:41 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src84.ximg exists
[Sun Oct 23 10:39:41 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src84_1.ximg exists
[Sun Oct 23 10:39:41 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src84 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 24.229200, observed total counts = 24.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 70 = 0.701613 pixels
[Sun Oct 23 10:40:36 2011] 24.196680 total counts/ 5.655880 bgd. counts: snr = 7.796117
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.701613 pixels
  Position = (1209.5, 877.0) = 5 22 56.20 33 27 52.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.5 +/- 4.9
  Background counts = 5.7
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Oct 23 10:41:47 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.721
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 0.46"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:54 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src83.ximg exists
[Sun Oct 23 10:41:54 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src83_1.ximg exists
[Sun Oct 23 10:41:54 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src83 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 24.450500, observed total counts = 24.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 70 = 0.013640 pixels
[Sun Oct 23 10:42:47 2011] 24.365910 total counts/ 5.619010 bgd. counts: snr = 7.908599
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.013640 pixels
  Position = (1209.5, 877.0) = 5 22 56.20 33 27 52.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 18.7 +/- 4.9
  Background counts = 5.6
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:35 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.reg
[Sun Oct 23 10:47:35 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (1188, 855) - (1231, 898)
[Sun Oct 23 10:47:35 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70.gif
[Sun Oct 23 10:51:34 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Sun Oct 23 10:51:34 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.evt.gz[events] = 19 counts
[Sun Oct 23 10:51:34 2011] Mean chipx,y = (43.47, 912.26)
[Sun Oct 23 10:51:34 2011] Mean tdetx,y = (4219.74, 4150.47)
[Sun Oct 23 10:51:34 2011] chipx,y range = (31.00-61.00, 889.00-924.00)
[Sun Oct 23 10:51:34 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 15 counts
[Sun Oct 23 10:51:34 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Sun Oct 23 10:51:34 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Sun Oct 23 10:51:34 2011] Not generating rmf since there are only 18 counts
[Sun Oct 23 10:51:37 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:55 2011] 195.57
[Sun Oct 23 11:06:59 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:59 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.000149, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src70.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 1.9e-15
[Sun Oct 23 11:07:54 2011] Source 70 has fewer than 100.000000 counts, skipping spectral fitting