[Sun Oct 23 10:36:55 2011] Detection parameters:
  Position = (1190.8, 788.1) = 5 22 56.92 33 27 8.6
  Extent = 0.6" x 0.5", rotation angle = 102 degrees
  Source counts = 28.4 +/- 5.7
  Background counts = 3.6
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 1.87'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 23 10:39:35 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.823
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 0.42"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Sun Oct 23 10:39:40 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 40.748200, observed total counts = 41.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 56 = 0.437299 pixels
[Sun Oct 23 10:40:36 2011] 40.475000 total counts/ 14.301200 bgd. counts: snr = 6.921186
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.437299 pixels
  Position = (1191.3, 788.1) = 5 22 56.92 33 27 8.3
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 26.2 +/- 6.4
  Background counts = 14.3
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sun Oct 23 10:41:47 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 56 for pass 1, mean size = 0.47"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Sun Oct 23 10:41:53 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src56 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 40.779400, observed total counts = 41.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 56 = 0.005091 pixels
[Sun Oct 23 10:42:47 2011] 40.509000 total counts/ 14.289100 bgd. counts: snr = 6.936312
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.005091 pixels
  Position = (1191.3, 788.1) = 5 22 56.92 33 27 8.3
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 26.2 +/- 6.4
  Background counts = 14.3
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:34 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.reg
[Sun Oct 23 10:47:34 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (1170, 767) - (1213, 810)
[Sun Oct 23 10:47:34 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56.gif
[Sun Oct 23 10:50:17 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sun Oct 23 10:50:17 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.evt.gz[events] = 29 counts
[Sun Oct 23 10:50:17 2011] Mean chipx,y = (35.72, 818.86)
[Sun Oct 23 10:50:17 2011] Mean tdetx,y = (4313.14, 4142.72)
[Sun Oct 23 10:50:17 2011] chipx,y range = (20.00-51.00, 800.00-835.00)
[Sun Oct 23 10:50:17 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_bgd.evt.gz[events] = 24 counts
[Sun Oct 23 10:50:17 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_bgd.img exist, delete to re-create
[Sun Oct 23 10:50:17 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sun Oct 23 10:50:17 2011] Not generating rmf since there are only 26 counts
[Sun Oct 23 10:50:20 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:54 2011] 178.587
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.000208, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src56.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 2.9e-15
[Sun Oct 23 11:07:54 2011] Source 56 has fewer than 100.000000 counts, skipping spectral fitting