[Sun Oct 23 10:36:53 2011] Detection parameters:
  Position = (1174.9, 648.7) = 5 22 57.54 33 25 60.0
  Extent = 0.6" x 0.5", rotation angle = 28 degrees
  Source counts = 26.9 +/- 5.5
  Background counts = 3.1
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 2.83'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Oct 23 10:39:35 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.866
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 0.55"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src62.ximg exists
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src62_1.ximg exists
[Sun Oct 23 10:39:40 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src62 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 34.326400, observed total counts = 33.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 30 = 1.031326 pixels
[Sun Oct 23 10:40:36 2011] 33.985150 total counts/ 3.875850 bgd. counts: snr = 15.293862
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.031326 pixels
  Position = (1175.7, 649.3) = 5 22 57.53 33 25 60.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 30.1 +/- 5.8
  Background counts = 3.9
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Oct 23 10:41:47 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.834
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 62 for pass 1, mean size = 0.56"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src62.ximg exists
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src62_1.ximg exists
[Sun Oct 23 10:41:53 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src62 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 37.311100, observed total counts = 36.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 30 = 0.075027 pixels
[Sun Oct 23 10:42:47 2011] 37.052650 total counts/ 7.233150 bgd. counts: snr = 11.087576
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.075027 pixels
  Position = (1175.8, 649.3) = 5 22 57.53 33 25 60.0
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 29.8 +/- 6.1
  Background counts = 7.2
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:34 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.reg
[Sun Oct 23 10:47:34 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (1150, 623) - (1202, 675)
[Sun Oct 23 10:47:34 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30.gif
[Sun Oct 23 10:50:34 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Oct 23 10:50:34 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.evt.gz[events] = 30 counts
[Sun Oct 23 10:50:34 2011] Mean chipx,y = (18.23, 678.47)
[Sun Oct 23 10:50:34 2011] Mean tdetx,y = (4453.53, 4125.23)
[Sun Oct 23 10:50:34 2011] chipx,y range = (3.00-28.00, 660.00-696.00)
[Sun Oct 23 10:50:34 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 21 counts
[Sun Oct 23 10:50:34 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Oct 23 10:50:34 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Oct 23 10:50:34 2011] Not generating rmf since there are only 29 counts
[Sun Oct 23 10:50:37 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:54 2011] 130.672
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.000236, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src30.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 4.5e-15
[Sun Oct 23 11:07:54 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting