[Sun Oct 23 10:36:53 2011] Detection parameters:
  Position = (1163.4, 637.4) = 5 22 57.99 33 25 54.4
  Extent = 0.5" x 0.5", rotation angle = 139 degrees
  Source counts = 26.5 +/- 5.5
  Background counts = 3.5
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 2.96'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sun Oct 23 10:39:35 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 65 for pass 0, mean size = 0.57"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src65.ximg exists
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src65_1.ximg exists
[Sun Oct 23 10:39:40 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 34.887800, observed total counts = 35.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 29 = 0.824522 pixels
[Sun Oct 23 10:40:36 2011] 34.901250 total counts/ 7.908550 bgd. counts: snr = 9.598379
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.824522 pixels
  Position = (1164.1, 637.8) = 5 22 57.98 33 25 54.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 27.0 +/- 5.9
  Background counts = 7.9
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sun Oct 23 10:41:47 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.089
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 65 for pass 1, mean size = 0.46"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src65.ximg exists
[Sun Oct 23 10:41:53 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src65_1.ximg exists
[Sun Oct 23 10:41:53 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src65 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 33.992300, observed total counts = 34.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 29 = 0.026850 pixels
[Sun Oct 23 10:42:47 2011] 33.837450 total counts/ 6.201050 bgd. counts: snr = 11.098106
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.026850 pixels
  Position = (1164.1, 637.8) = 5 22 57.99 33 25 54.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 27.6 +/- 5.8
  Background counts = 6.2
  Rate = 0.0002 +/- 5e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:34 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.reg
[Sun Oct 23 10:47:34 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (1143, 616) - (1185, 659)
[Sun Oct 23 10:47:34 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29.gif
[Sun Oct 23 10:50:42 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sun Oct 23 10:50:42 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.evt.gz[events] = 29 counts
[Sun Oct 23 10:50:42 2011] Mean chipx,y = (20.00, 661.72)
[Sun Oct 23 10:50:42 2011] Mean tdetx,y = (4470.28, 4127.00)
[Sun Oct 23 10:50:42 2011] chipx,y range = (2.00-34.00, 648.00-680.00)
[Sun Oct 23 10:50:42 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 15 counts
[Sun Oct 23 10:50:42 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Sun Oct 23 10:50:42 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sun Oct 23 10:50:42 2011] Not generating rmf since there are only 27 counts
[Sun Oct 23 10:50:45 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:54 2011] 195.63
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.000219, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src29.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 2.8e-15
[Sun Oct 23 11:07:54 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting